Read Sharp UP-3500 (serv.man25) Service Manual online
Page 4 - 39
1.
Foreword
The ROM version V1.31 is based on V1.22, but it is not compatible (neither Data nor Language
Text Resources) with this ROM version.
Text Resources) with this ROM version.
Important note: As known from the previous version already, due to changes in the memory
structure, it becomes necessary to carry out the Master Reset with the dealer password
(13974682) after making the ROM Version update.
structure, it becomes necessary to carry out the Master Reset with the dealer password
(13974682) after making the ROM Version update.
2.
General.
The “GLU (ALL)” file does not exist anymore. Because the file “GLU2 (ALL)” is necessary in
order to work with Advance Order, Credit Customer Order beside of GLU and Room
registrations, the not needed “GLU (ALL)” has been removed from the filing and the file “GLU2
(ALL)” was renamed to “GLU (ALL)”.
order to work with Advance Order, Credit Customer Order beside of GLU and Room
registrations, the not needed “GLU (ALL)” has been removed from the filing and the file “GLU2
(ALL)” was renamed to “GLU (ALL)”.
For the new features of Closed Transaction, it is mandatory that the file “CLOSE TRANS.2” has
been created. Like for the “GLU2 (ALL)” file, “CLOSE TRANS.2” has been renamed to “CLOSE
TRANS.” while “CLOSE TRANS.” has been removed from the filing.
been created. Like for the “GLU2 (ALL)” file, “CLOSE TRANS.2” has been renamed to “CLOSE
TRANS.” while “CLOSE TRANS.” has been removed from the filing.
3.
Parameter setting at Clerk.
In case of working with employees, it becomes necessary that the employee preset must be
preset able for each employee but not for a clerk. To meet this requirement, in the former ROM-
Version, the presets could be settable at each clerk respectively at each employee depending to
SRV #987A (flexible or fixed employee/clerk system). Unfortunately, after master reset, the
presets have to be set at employee because of the flexible system, but no employee was
created during master reset procedure. As a consequence, either employees have to be
created or the service parameter has to be changed. To avoid any additional programming due
to this default setting, we changed back to the former specification. At this version, the
employee related presets have to be set for each employee and the clerk related presets for
each clerk. The presets which have been set at the clerk become valid during TimeIn of the
employee when he assigned to that clerk.
preset able for each employee but not for a clerk. To meet this requirement, in the former ROM-
Version, the presets could be settable at each clerk respectively at each employee depending to
SRV #987A (flexible or fixed employee/clerk system). Unfortunately, after master reset, the
presets have to be set at employee because of the flexible system, but no employee was
created during master reset procedure. As a consequence, either employees have to be
created or the service parameter has to be changed. To avoid any additional programming due
to this default setting, we changed back to the former specification. At this version, the
employee related presets have to be set for each employee and the clerk related presets for
each clerk. The presets which have been set at the clerk become valid during TimeIn of the
employee when he assigned to that clerk.
Click on the first or last page to see other UP-3500 (serv.man25) service manuals if exist.