UP-3301 (serv.man6). In-Line Operation Manual - Sharp EPOS Service Manual (repair manual). Page 49

When you want to enter manually the PLU item programmed for the drink dispenser, the drink
dispenser connected to the machine must be in the off-line mode. Generally in the IRC system,
the on-line/off-line mode choice information is distributed when programmed. However, if a
trouble occurs in the IRC system, such information can not be distributed.
In this case, you can locally set the on-line/off-line mode of each drink dispenser by this
procedure.

This local on-line/off-line mode choice is valid only for the drink dispenser whose number was
specified and distributed via the LAN.  This job can only specify a drink dispenser connected to
another machine, while it can not specify the drink dispenser directly connected to the machine

at which this programming is being carried out.

• This job directly changes the drink dispenser on-line/off-line mode information distributed,

via the LAN, from another machine connected to a drink dispenser. When the LAN is
recovered, therefore, the on-line/off-line mode choice information on all machines in the
system must be updated again.

• This job does not check whether a drink dispenser with a specified number really exists or

not.

Enter the PGM2 mode.

Select “SETTING” and touch the 

ENTER

 key.

Select “DRINK DISPENSER” and touch the 

ENTER

 key.

Move the cursor to “LOCAL DD” and touch the 

ENTER

key.

With the cursor at the desired drink dispenser number,

select ON-LINE or OFF-LINE and touch the 

ENTER

 key.