Read Sharp UP-3300 (serv.man20) User Guide / Operation Manual online
7
3. Close store operation (PGM2 mode) — master and satellite
When the close store operation is performed at the master, the IRC system is closed and the
registration function becomes unavailable at all the machines in the IRC system. It should be
noted that the close store operation is possible only when all the satellites are in their SIGN-OFF
state. After this operation, the communications between the master and satellites which have
been enabled with the open store operation are disabled. The master, however, can download
preset data and reset the sales data at satellites.
In the close store state, any key operation in the REG or MGR mode is invalid.
Select “CLOSE STORE” from the PGM2 MODE window
and touch the
ENTER
key.
NOTE
•
You can also perform the close store operation at each satellite. Once the close store
operation is performed at a satellite, you can no longer make a registration at the satellite.
•
If a satellite is in the SIGN-ON state and encounters an error, the master displays and prints
the machine number of the satellite that has encountered the error.
•
When the close store operation is performed, the data remaining in the T-LOG buffers of all
the satellites is collected by the master.
•
If a transmission error occurs during the close store operation, the master displays and prints
the machine number of the satellite that has encountered the error.
In this case, a receipt is issued and the close store operation is not performed successfully.
Click on the first or last page to see other UP-3300 (serv.man20) service manuals if exist.