Read Sharp UP-3300 (serv.man17) Service Manual online
11. MCR UNIT: UP-E12MR2
1) Fix the MCR ANGLE
1
to the lower cabinet with two screws
2
.
2) Connect the MCR cable
3
to the MCR connector with the cable
holder
6
, and tighter the screw
7
on the back of lower cabinet.
3) Install the ferrite Core
4
to the MCR cable.
4) Install the Nylon band
8
to the cable.
5) Fix the earth wire
5
from the UP-E12MR2 with the screw.
12. DRAWER BOX UNIT:
ER-03DW/04DW/05DW
1) Connect the drawer cable
1
to the drawer connector
2
.
2) Fix the earth wire
3
from drawer box unit with the screw
4
.
3) Install the ferrite Core
5
to the drawer cable.
4) Fix the drawer cable
1
with the cable holder
6
, and tighten the
screw
7
on the back of lower cabinet
A
or
B
.
13. REMOTE DISPLAY
When the remote display is installed, service resetting is required.
1) Connect to the Display cable
1
to the display connector
2
.
2) Fix the earth wire
3
from the display unit with screw
4
.
14. HOW TO EXTEND DISPLAY POLE
The pole can be extended by installing the attached pole to the
standard pole.
standard pole.
COMPONENT LIST:
No.
NAME
USE
Q’ty
G
Pole cabinet
Pole extension
2
H
Screw (M2
×
8)
Pole connection
4
I
Screw (M4
×
16)
Securing the UP-P16DP to
the wooden table
the wooden table
4
J
Screw (M4
×
20)
Securing the UP-P16DP to
the metal table
the metal table
4
K
Nut
Securing the UP-P16DP to
the metal table
the metal table
4
1) Remove the five screws
1
.
2) Remove the Base angle
2
.
1
2
3
4
1
1
2
– 6 –
Click on the first or last page to see other UP-3300 (serv.man17) service manuals if exist.