Read Sharp UP-3300 (serv.man17) Service Manual online
2)
PARTS NAME
PARTS CODE
LOCATION
FFC
CONNECTOR
CONNECTOR
QCNCW7217RC3J
TOUCH
PWB: CN1
PWB: CN1
•
How to Insert FFC
(1)
Open the slider to unlock position
Open the slider upwards up to an angle of 60 degrees. If the
slider does not fully open, the FFC can not be smoothly inserted.
Open the slider upwards up to an angle of 60 degrees. If the
slider does not fully open, the FFC can not be smoothly inserted.
(2)
Insert the FFC
Insert the FFC firmly until the FFC hits the bottom of the
connector’s insulator.
Insert the FFC firmly until the FFC hits the bottom of the
connector’s insulator.
(3)
Close the slider to lock position
Insert the FFC and then push the slider downward.
Insert the FFC and then push the slider downward.
(4)
To pull out the FFC, unlock the slider to pull it out in the same
procedures as (1).
procedures as (1).
1. Removing the Rear display filter
1) Remove the two Screws
1
.
2) Remove the Rear display filter
2
.
2. Replacing the Rear display filter
Install the Rear display filter in the reverse order of removing.
FFC
FFC
CONNECTOR
FFC
CONNECTOR
FFC
CONNECTOR
FFC
FFC
– 2 –
Click on the first or last page to see other UP-3300 (serv.man17) service manuals if exist.