SHARP POS SOFTWARE V4 (serv.man277). Version History (Bugs and Specification changes) Up to Sharp Pos Software V4.1.806 - Sharp EPOS Driver / Update

sharp pos software v4 (serv.man277) driver / update
Model
SHARP POS SOFTWARE V4 (serv.man277)
Pages
21
Size
303.3 KB
Type
PDF
Document
Driver / Update
Brand
Device
EPOS / Version History (Bugs and Specification changes) Up to Sharp Pos Software V4.1.806
File
sharp-pos-software-v4-sm277.pdf
Date

Read Sharp SHARP POS SOFTWARE V4 (serv.man277) Driver / Update online

Sharp POS V4.1.806 VPM V2.1.0.255 
Version History (Bugs and Specification changes)
 
 
     
(See the Sharp POS V4 supplementary manual for programming details) 
 
07/02/12   
 
 
242 
Feature Added 
It is now possible to attach 
the „Reason report‟ to the end of day report.  
Previously the „Reason report‟ was only available to be taken manually.
 
 
 
241 
Open Table 1, sell few items, then store table. 
Open Table 2, choose seat 1, but then change to seat 2 before entering any 
items. It then displays table 1, and displays "Create transaction error 2700" when 
you try and sell any items. You are also able to void the items as though you 
have table 1 open. Now fixed 
 
 
23/01/12 
Sharp POS V4.1.800 VPM V2.1.0.254 
 
 
240 
Feature Added 
FTP file transfer is now available for Cashrsp, EOD sales file Exports, real-time 
loyalty, Commsin, Commsin/Now Commsout. 
 
 
239 
Feature added 
For servers who take cash but do not have a cash drawer assigned, i.e. Hand 
held servers 
Cash Reports will where necessary have a 'Not In Drawer' section and an  'ex 
Till' section detailing the non assigned servers transactions.
 
 
 
238 
Feature Added 
It is now possible to enter the Payment screen when the subtotal amount is zero. 
Add the following S2001.ini setting to all tills. 
 
ALLOWZEROPAY=1
 
 
 
237 
Feature Added 
When using SharpPOS Standard loyalty schemes, it is now possible to set a limit 
on the usage of loyalty staff cards. This is achieved by the ability to set a money 
limit for loyalty cards that are configured as staff cards. 
 
There are 3 types of limit available for each Loyalty Scheme, these limits may be 
defined for sales within a day, a week or a calendar month. To allow for seasonal 
variation, each calendar month‟s limit can be set individually. 
 
 
236 
Feature Added 
If VPM 
– Configure - Till Configuration has 'Day Seq no. on KP' checked, the 
KVM „Kitchen Monitor‟ will show the Day Sequence number rather than a mix of 
till and transaction number. 
 
 
235 
When starting SharpPOS with the shortcut S2008.exe and the /d20 option (start-
up delay), the 
„Splash screen‟ will show the delay countdown. And it is no longer 
possible to start 2 instances of S2008.exe. 
 
 
234 
End of Day Backups will now begin after all End Of Day printing has been 
performed. On previous versions printing waited until the EOD backup had 
completed. This is also available in Version 3.1.1041. 
 
 
233 
When a payment method was set for over tender and change, the change 
amount was being deducted twice in the cashrsp file. Now fixed 
 
 
232 
VIP sales from the Handheld where not being processed. Now fixed 
 
 
231 
When „standard Loyalty‟ and Detailed log type was set, the Loyalty.con file was 
not produced. Now fixed 
 
 
05/01/12 
Sharp POS V4.1.780 VPM V2.1.0.254 
 
 
230 
Feature Added 
Using the S2001.ini CASHRSP_LDISC=0 It is now possible when performing 
loyalty discounts for the cashrsp to replace $LDISC and $LVDISC with $SDISC 
and $SVDISC (these are the normal entries for discounts).
 
 
 
229 
Feature Added 
New 'drawer empty/export' function in Manager Menu (new function 427) 
In Manager and Utilities Menu, Utility button and Utility title can be changed in 
a text schemes 
 
New options in VPM 
– Configure – Till Configuration – options(2),‟Allow‟ and 
'DrawerExportPrint' 
 
 
228 
Feature Added 
Allow multiple deposit prepayments. 
 
 
227 
Feature Added 
Loyalty limits for staff cards
 
 
 
226 
Feature Added 
It is now possible to allow deposit reporting in dept and group reports with the 
S2001.ini setting DEPOSITSINREPORTS=n (1: dept report, 2=group report, 
3=dept+group report).
 
 
 
225 
Feature Added 
It is now possible to show the table name on the receipt and bill using the 
S2001.ini setting below. 
TABLENAMEONRCT=1
 
 
 
 
Feature Added 
If Floors folder or installed floor files removed, the SharpPOS installer start-ups. 
Now fixed and a new setting in VPM 
– Configure – Till Configuration – options(2) 
„Show Floor button‟ added.
 
 
 
224 
Feature Addded 
When using deposits it is possible to give deposit voucher as change. Also used 
by HH interface. 
 
 
223 
Feature Added 
Extending deposits to allow quantity use, and allow in any transaction. 
 
 
222 
VPM 
– Configure - System Configuration - More 'Booking Deposit PLU' renamed 
'Default Deposit PLU' 
 
 
221 
On bill, server name could be garbage - if server is no longer in database 
 
 
220 
Using Table Grouping on slave had problems - after bill or cashing off tables 
slave display could show incorrectly. Now fixed 
 
 
219 
Deposit prepayment being added twice. Now fixed 
 
 
218 
Voiding a prepayment didn't work for multiple prepayments. Now fixed 
 
 
217 
Secure with T&A - used wrong function to check manager authority, and exiting 
from T&A didn't return new server number, so couldn't change if auth level not 
right. Now fixed. 
 
 
216 
Reasons Report did not show product description correctly. Now fixed  
 
 
215 
VPM batch edit. If product had image batch edit gives run time error 
 
 
28/11/11 
Sharp POS V4.1.753 VPM V2.1.0.251 
 
214 
Feature Added 
DEPOSITINFORCT=x 
for printing deposit description on receipt and/or voucher 
x=1 for voucher, x=2 for receipt, x=3 for both 
 
 
213 
Feature Added 
Function 45 ('open account table') now used for authority checking when trying to 
open account tables. 
 
 
212 
Feature Added 
New S2001.ini setiings 
LOYRCTSIGN=1 
adds signature line to receipt when loyalty used 
LOYRCTCOPY=1 
prints 2nd receipt when loyalty used 
 
 
211 
Feature Added 
 
Deposits in Dept / group report 
 
 
210 
Feature Added 
 
The MM total appears under same conditions as when promo totals are printed in  
dept/group reports, i.e. 
PROMOSINREPORT=1 or 2 (Close Session and EOD) 
 
 
209 
Feature Added 
Integration Payments by Group reporting 
New Reporting options: 
New cfgtill field SessRepPaymentsByGroup 
New Cfgsys field RepPaymentsByGroup 
 
 
208 
Feature Added 
EOD file export option 
New field in VPM 
– Configure – System configuration 
SysExportPaymentsByGroup 
 
 
207 
Feature Added 
Age verification: new age option 25 has been added. 
 
 
206 
Feature Added 
For Handhelds set as a proxy, and if master should restart, a logon is not needed 
 
 
205 
Feature Added 
If you choose e.g. proxy till 4, and you want the receipt/bill it to go Till 1 Voucher 
printer: 
Configure Till Config till 4, printers: enable Bill on 4 and put the following 
S2001.ini setting on the master till.  
04BILL=01VOUCHER 
 
 
204 
Feature Added 
To stop the standard logged on message on custdisplay I'll add an ini setting 
LOGGEDONNODISPLAY=1 
 
 
203 
Feature Added 
New layout for seat checklist (layout=3), order is Course/Seat rather than 
Seat/Course. This layout also prints total items for each course. 
 
 
202 
Feature Added 
KP at printing from bar transactions: If VPM 
– Configure – till configuration – texts 
- KP Bar Name is empty the KP printout size will be reduced. 
 
 
201 
Feature Added 
S2001.ini setting 
BILLPRECUTFEED=n 
sets number of line feeds before cut on bill (default is 9) 
 
RCTPRECUTFEED=n 
sets number of line feeds before cut on receipt (default is 6)
 
 
 
200 
When touching the info box in booking manager, the Sharp Pos produces an 
application error.  Now fixed. 
 
 
199 
PLU with freetext caused disconnected/connected log messages. Now fixed. 
 
 
198 
In EOD reports there was an extra cut between older reports and newer ones.  
Now fixed.  
 
 
197 
C:\Vpro\Commsout dated folder is now only created if it's needed. 
 
 
196 
Export cfgt1000.csv) now shows upto 50 payment methods now 50 as in SPOS 
and includes deposit data. 
 
 
195 
VPM Screen mode instability (update errors), fixed. 
 
 
194 
I
f you select the flag for “Table only” orders printers, and then sell an item form 
the bar it still prints on the KP. Now fixed 
 
 
 
 
 
05/10/11 
Sharp POS V4.1.719 VPM V2.1.0.236
 
193 
Feature Added 
The cash Drawer now fires for Paid in / Paid out operations.
 
 
 
192 
Feature Added 
It is now possible to produce a warning message on the screen, this message 
can be set by department. 
 
 
191 
Feature added 
Age verification 
 
 
190 
Feature added 
It is now possible to fire the cash drawer when the subtotal amount is zero. 
Using the following setting.
 
PAYMENTZEROOPENDRAWER=99
 
 
 
189 
Feature Added 
The following printing options for KP items have now been added 
Previous settings 
KPTableOnlyMove=0    ' moving bar to table, don't print items at all 
KPTableOnlyMove=1    ' (default) moving bar (or table) to table, print items 
 
New settings: 
KPTableOnlyMove=2    ' moving bar to table, don't print items yet (leave for 
Page of 21
Display

Download Sharp SHARP POS SOFTWARE V4 (serv.man277) Driver / Update

Here you can read online and download Sharp SHARP POS SOFTWARE V4 (serv.man277) Driver / Update in PDF. SHARP POS SOFTWARE V4 (serv.man277) driver / update will guide through the process and help you recover, restore, fix, disassemble and repair Sharp SHARP POS SOFTWARE V4 (serv.man277) EPOS. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.