RZ-X850 (serv.man4). RZ-X850 Service Manual - Sharp EPOS Service Manual (repair manual). Page 2

1

Note : This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in 
a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference, in which case the 
user will be required to correct the interference at own expenses.

This Class A digital apparatus complies with Canadian ICES-003  
Cet appareil numerique de la classe A est conforme à la norme NMB-003 du Canada

.   Install this terminal in a location that is not subjected to direct radiation, unusual 

temperature changes, and high humidity or exposure to water or other liquids. 
Installation in such locations could cause damage to the cabinet and the electronic 
components.

2. 

 Do not drop this terminal nor subject it to any strong shock.  

This may cause damage to the terminal and the hard disk mounted in it.

3. 

 Do not apply excessive pressure to the display. Do not use a sharp-pointed object on 

the display. 
This may cause damage to the LCD display.

4. 

 The socket-outlet shall be installed near the equipment and shall be easily accessible. 

For a complete electrical disconnection, remove the AC plug from the wall outlet.

5. 

 The terminal plugs into any standard wall outlet (official / nominal voltage).

Other electrical devices on the same electrical circuit could cause the terminal to 
malfunction.

6. 

 Slots and openings in the cabinet and the back have been provided for ventilation. 

To ensure the reliable operation of your system and protect it from overheating, 
these openings must not be blocked or covered. 

7. 

 Please observe the following when an optional drawer is used.  

The drawer units should be securely fitted to the supporting platform to avoid 
instability when the drawers are open.