Read Sharp RZ-X750 (serv.man3) Service Manual online
16
INSTALL LOCATION & DIRECTIONS FOR USE
Before system installation, it is important to select the safe and comfortable place
which is satisfied with the following contents.
which is satisfied with the following contents.
1.
Select a hard surface with enough room to meet system requirements.
2.
Select a place where the product is protected from electrostatic shock which could
cause damage to the product or data loss.
3.
Select a place for the product with ample ventilation to prevent heat build up.
4.
Select the dry and cool place and avoid high temperature difference, high humidity,
dense dust, or the direct rays of the sun.
5.
Select proper electric power. Connect all the equipment to properly grounded
outlet.
6.
Keep the systems away from devices generating electricity.
7.
Do not place heavy materials on this product, and do not put high pressure on the
product.
8.
Do not hit, drop or allow other material to drop onto the products damage may
result.
9.
Do not hit or drag on its surface with sharp instrument or pen because touch panel
can be easily scratched, and the durability can be decreased due to the damage.
10
. This product is not waterproof. Please keep this product away from liquid.
11
. After turning the product OFF wait for a minimum of 5 seconds before turning the
product back ON
12
. Turn off and Disconnect the machine from power when moving the product.
13
. Do not move the product to place where the difference of temperature is more
than 10 degrees because that can cause the corrosion of the product.
14
. Microsoft POS Ready 2009 is made specifically for use in POS systems and Kiosks.
Some software may not operate as expected due to differences from Windows XP
general OS by Microsoft(R).
general OS by Microsoft(R).
15
. When COM port is set to provide +5 volts through the serial pin, it is required that
the unit be turned off when attaching or removing any serial from the COM port.
Click on the first or last page to see other RZ-X750 (serv.man3) service manuals if exist.