Read Sharp RZ-X735 (serv.man3) Service Manual online
7
FEATURES
Product features
•
The product uses a high visibility (300cd/m2 luminance) LED screen with a touch
screen interface for input.
screen interface for input.
•
The display may be tilted for the best viewing angle. The angle can be adjusted within
140 degrees left/right and 45 degrees up/down .
140 degrees left/right and 45 degrees up/down .
•
The product has no fan and is noiseless by design.
•
Transcend 64 GB SSD supports Advance flash management (Global-wear-Leveling/
Bad Block management/TRIM /SMART) function and realizes a stable system
configuration through the backup of OS, disk, partition, and file data, as well as
providing a disaster restoration solution by using Total Recovery software.
Bad Block management/TRIM /SMART) function and realizes a stable system
configuration through the backup of OS, disk, partition, and file data, as well as
providing a disaster restoration solution by using Total Recovery software.
•
This product uses Microsoft POS Ready 7 (or similar operating system) which is
designed for POS system and KIOSK applications.
designed for POS system and KIOSK applications.
•
This product has the wake-on function based on Magic Packet™ technology for
remote booting and control through LAN.
remote booting and control through LAN.
•
The Resume (wake) on LAN function of RZ-X735F has the following limitations:
If BIOS function [Resume on LAN] is set to "Enable" the system will wake from “Power
Off” IF the normal Widows® shut down procedure is completed.
- If RZ-X735F is turned off by unnatural means (other than the normal Widows® shut
If BIOS function [Resume on LAN] is set to "Enable" the system will wake from “Power
Off” IF the normal Widows® shut down procedure is completed.
- If RZ-X735F is turned off by unnatural means (other than the normal Widows® shut
down procedure) the Resume on LAN will NOT “wake” the terminal.Examples of
unnatural “Power Off” include:
unnatural “Power Off” include:
- Press the power button to turn off
- External power loss to the terminal (unplugged, blackout, etc.)
- External power loss to the terminal (unplugged, blackout, etc.)
•
To enable the Resume on LAN function in the event of power loss set BIOS function
Power Management setting [Restore on AC Power Loss]” to “Power On” state.
Power Management setting [Restore on AC Power Loss]” to “Power On” state.
•
With this setting, if power is lost, the unit will turn on when power is restored and will
re-enable the [Resume on LAN] function.
re-enable the [Resume on LAN] function.
•
This product provides Several ports (USB, Serial, Parallel, LAN, and etc.) for facilitating
the use of various POS peripheral devices.
the use of various POS peripheral devices.
Note:
•
The application software will determine the usage and availability of the interfaces.
•
If the terminal is turned off by Pressing and the power button and a power loss then occurs
the terminal will NOT start automatically.
the terminal will NOT start automatically.
Click on the first or last page to see other RZ-X735 (serv.man3) service manuals if exist.