Read Sharp RZ-X650 (serv.man3) Service Manual online
24
Remove the touch form panel.
3
Warning:
•
Caution for the touch panel
To fit into the LCD front the cabinet touch panel should be assembled along the guide.
To prevent gap between the touch panels, there should be assembled flat.
Please put the article of 5Kg weight on middle of the LCD panel bracket during assembly.
To fit into the LCD front the cabinet touch panel should be assembled along the guide.
To prevent gap between the touch panels, there should be assembled flat.
Please put the article of 5Kg weight on middle of the LCD panel bracket during assembly.
Assembly the system
System assembly can be done by reversing disassembly procedure.
Disassembly & assembly the MSR
Disassembly the MSR(Magnetic Stripe Reader)
If MSR is not attached to the system, attach it according to MSR attachment contents.
If MSR is not attached to the system, attach it according to MSR attachment contents.
Make sure the system and peripherals are off.
1
Remove screws fixed the MSR plastic cover. Disassembly the MCR rear cover should be
opened toward the direction of arrow.
opened toward the direction of arrow.
3
Disconnect cables for the peripherals and DC power input jack from the system.
2
Click on the first or last page to see other RZ-X650 (serv.man3) service manuals if exist.