Read Sharp ER-A771 (serv.man8) User Guide / Operation Manual online
13
NOTE
Check the contents of the programming of all the satellites in the IRC system that have received
the preset data.
8. Downloading the contents of the programming to
satellites — master
When you have completed the programming at the master, you can distribute the preset data
from the master to all satellites in the IRC system.
(1) Initial downloading
For initial setup of the IRC system, follow the downloading procedure below. When the
preset data in the master is downloaded to each satellite, existing preset data in the
satellite, if any, is cleared.
1.
Enter the PGM2 mode from the mode selection
window.
2.
Select “INITIAL D/L” and press the
ENTER
key.
The INITIAL D/L window will open.
3.
If you wish to distribute all preset data files in the
master to satellites, select “ALL PGM” and press the
ENTER
key.
If you wish to distribute an individual preset data file,
select the corresponding data item and press the
ENTER
key.
Enter an appropriate code range if needed.
4.
If you wish to download the preset data to all
satellites, select “ALL” and press the
ENTER
key. If you
wish to download the data to certain satellite(s), select
“MACHINE SELECT” and press the
ENTER
key. In this
case, the “MACHINE SELECT” window will open.
Move the cursor to the corresponding machine
numbers and select “YES.”
Click on the first or last page to see other ER-A771 (serv.man8) service manuals if exist.