Read Sharp ER-A771 (serv.man7) User Guide / Operation Manual online
Tilt control screws
1. Loosen the outer screw.
2. Adjust the height of the inner screw.
3. Tighten the outer screw to fix it.
Keyboard
Inserting the keyboard sheet
Insert the keyboard sheet between the keyboard cover and the cabinet as illustrated below, then push the
claws at the top of the keyboard cover into the slots in the cabinet.
claws at the top of the keyboard cover into the slots in the cabinet.
• Do not spread the keyboard cover
too far as it might tear.
• Replace the keyboard sheet with a
new one if by chance it gets wet.
Use of a wet keyboard sheet may
cause problems.
Use of a wet keyboard sheet may
cause problems.
• Be sure to use only SHARP-
supplied keyboard sheets. Thick or
hard sheets make key operation
difficult.
hard sheets make key operation
difficult.
• Smooth the keyboard sheet evenly
under the keyboard cover, without
any folds or wrinkles, to ensure
easier operation.
any folds or wrinkles, to ensure
easier operation.
• If you require a new keyboard sheet,
please contact your dealer.
• The keyboard cover will eventually wear out. If your keyboard cover is dirty or broken, replace the cover
with a new one. For details, contact your authorized SHARP dealer.
NOTE
These lines can be used to measure the height of the screw.
Keyboard sheet
Cabinet
Keyboard cover
8
Click on the first or last page to see other ER-A771 (serv.man7) service manuals if exist.