Read Sharp ER-A771 (serv.man6) Service Manual online
ER-A771VI
MCR unit: UP-E12MR
– 4 –
6) Install the Nylon band
4
to the cables.
Fig.8
Note: If the ER-02EF2 is inserted into the lower slot, the removal of the
PWB becomes difficult. It is recommended to insert it into the
upper slot.
11. MCR unit: UP-E12MR
1) Fix the MCR angle
1
to the lower cabinet with two screws
2
.
2) Remove the three screws
3
.
3) Remove the HDD cover
4
.
4) Connect the MCR cable
5
to the MCR connector: CN12
6
on the
MAIN PWB.
5) Fit the MCR cable
5
to the slit part
A
of the bottom cabinet to
install the HDD cover
4
.
6) Fix the three screws
3
.
Fig.9
12. Drawer box unit: ER-03DW/04DW
/05DW
1) Connect the drawer cable
1
to the drawer connector
2
.
2) Fix the earth wire
3
from drawer box unit with the screw
4
.
Fig.10
3) Install the ferrite Core
5
to the drawer cable.
4) Fix the drawer cable
1
with the cable holder
6
, and tighten the
screw
7
on the back of lower cabinet
A
or
B
.
13. Customer display: UP-I16DP
1) Remove the rear display cover.
2) Change the display filter.
Fig.11
EFT cable
1
2
RS232 cable
ER-A7RS2
ER-02EF2
RS232 cable
3
3
4
4
3
4
3
4
2
1
5
A
6
1 turn
Click on the first or last page to see other ER-A771 (serv.man6) service manuals if exist.