Read Sharp ER-A770 (serv.man8) Service Manual online
3.2 02FD
No
Procedure on P.C. side
No
Procedure on ER-A770 side
1
Install "02FD.EXE" on the P.C.
ALL RAM Data UpLoad : Go to "2"
ALL RAM Data DownLoad : Go to "9"
ALL RAM Data UpLoad : Go to "2"
ALL RAM Data DownLoad : Go to "9"
2
ALL RAM Data UpLoad
Connect P.C. and ER-A770 (CH2) via RS232. (Fig 1)
Connect P.C. and ER-A770 (CH2) via RS232. (Fig 1)
2
Enter the SRV mode.
Select " 2 SETTING ".
Select " 14 BACKUP SEND"
Select " 2 SETTING ".
Select " 14 BACKUP SEND"
3
ER-A770 shows
4
Execute "02FD.EXE" on P.C.
*Don’t execute the other Software at the same time.
*Don’t execute the other Software at the same time.
5
Set the Communication method by "Setting" Button.
Push "OK" Button.
6
Push "Receive Start" Button.
And Select the Receiving File.
And Select the Receiving File.
7
Communication starts.
7
Push TL key. ER-A770 shows
8
UpLoad is completed.
The initial Window is shown.
Push "Exit" Button.
The initial Window is shown.
Push "Exit" Button.
8
UpLoad is completed.
The SETTING menu is shown.
The SETTING menu is shown.
9
ALL RAM Data UpLoad
Connect P.C. and ER-A770 (CH2) via RS232. (Fig 1)
Connect P.C. and ER-A770 (CH2) via RS232. (Fig 1)
9
Enter the SRV mode.
Select " 2 SETTING".
Select " 15 BACKUP RECEIVE"
Select " 2 SETTING".
Select " 15 BACKUP RECEIVE"
10
ER-A770 shows
Push TL key.
SEND DATA ALL RAM
SPEED PROGRAMMED SPEED
BACKUP SEND
SENDING 00000
BACKUP RECEIVE
SPEED PROGRAMMED SPEED
Click on the first or last page to see other ER-A770 (serv.man8) service manuals if exist.