Read Sharp ER-A770 (serv.man5) Service Manual online
CODE : 00Z
q
SERVICE MANUAL
CONTENTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
UPR01CKSME
<OPTION>
Contactless clark key
MODEL
UP-R01CK
1. SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. REPLACING CLERK KEY (FOR UP-5900) . . . . . . . . . . . . . . . . . . 2
3. REPLACING CLERK KEY (FOR UP-600/700) . . . . . . . . . . . . . . . . 3
UP-R01CK
Specifications
– 1 –
1. Specifications
UP-R01CK is option Contactless cleak key linked to efficient consumer response/POS.
Applicable model: UP-5900
: UP-600/700
■
■
■
■
PARTS LIST
No.
Item
Parts
Parts code
Price Rank UP-600/700
UP-5900
Note
1
Clark key
Case
Label (CE mark)
RUNTZ3845RCZZ
BZ
2
Cable 1
QCNW-3326RCZZ
BM
3
Cable 2
QCNW-3327RCZZ
BN
4
Spacer 1
PSPAG2406RCZZ
BK
5
Spacer 2
PSPAG2404RCZZ
BK
6
Spacer 3
PSPAG2405RCZZ
BK
Reserved
UP-R01CK
Replacing clerk key (for UP-5900)
– 2 –
2. Replacing clerk key (for UP-5900)
Remove the top cabinet according to descruotion of the UP-5900 installation MANUAL.
1) Remove the connector of a clerk key
1
, Remove the two screws
2
, and remove the clerk key unit.
Remove the screw
3
and remove the clerk key.
2) Attach the contactless key to the plate with screw
1
. Attach the
contactless key unit to the lower cabinet with screws
2
, and set the
connector
3
and attach the cable clamp with screw
4
.
(The cable should be between two bosses
B
.)
Attach the upper cabinet, attach the lid
5
, and attach the cap
6
tightly.
Note: The peojection
A
side of the lid
5
should be upper side.
Note: In case contactless key attaches, be sure to attach CE-Mark label
(accessories) to a bottom cabinet.
Using contactless key of the product with which CE-Mark is not
attached is forbidden by law.
Refer to the following figure for the attachment position of CE-Mark.
Refer to the following figure for the attachment position of CE-Mark.
2
1
3
2
1
4
3
6
5
A
B
****
UP-R01CK
Replacing clerk key (for UP-600/700)
– 3 –
3. Replacing clerk key (for UP-600/700)
Refer to UP-600/700 Installation MANUAL for “opening and closing cabinet”.
1) Remove the connector of a clerk key
1
and remove the clerk key
unit.
Remove the cover
2
, and remove the screw
3
and remove the
clerk key.
2) Attach the contactless key to the plate with screw
1
, and attach the
cover
2
. Attach the contactless key unit to the lower cabinet, and
set the connector
3
.
Attach the upper cabinet, attach the lid
4
, and attach the cap
5
tightly.
Note: The peojection
A
side of the lid
4
should be upper side.
Note: In case contactless key attaches, be sure to attach CE-Mark label
(accessories) to a bottom cabinet.
Using contactless key of the product with which CE-Mark is not
attached is forbidden by law.
Refer to the following figure for the attachment position of CE-Mark.
Refer to the following figure for the attachment position of CE-Mark.
1
2
3
1
2
3
4
5
A
****