Read Sharp ER-A750 (serv.man13) Technical Bulletin online
SSP SETTING ORDER
1) Turn to the SRV MODE, select DIAGNOSTIC
→
ROM & SSP Diagnostic
→
Standard ROM Check, and then
confirm the ROM version number.
(Refer to the display example.)
2) Set the SSP by the attached SSP Setting Data.
3) Check the printed receipt has no error by comparing it with the set data.
4) Against the SSP data with an error, if any, turn to the SRV MODE, select SSP
→
SSP EDIT to correct the SSP
data.
5) Power off and on by pulling out the plug and inserting it.
Display example
The underlined part shows the ROM
version number.
(In this example, the version number
is shown with RAB1C.)
version number.
(In this example, the version number
is shown with RAB1C.)
3/6
Click on the first or last page to see other ER-A750 (serv.man13) service manuals if exist.