EPOSMANAGER. EPOS Manager Installation Manual - Sharp EPOS Service Manual (repair manual). Page 3

2

D:\    CD Drive Name

This will copy the file from the CD to the Master
machine, setting the flag to allow application exiting at
End of Day, and setup all the necessary PC Directory’s

On the UP5700 enter FM and select System
Configuration - System Parameters then sett all the
System Flags to Y except Number 1 & 16. If using the
Monitor option also set Report Flag 15 to “Y”.

All the Environment variables in GO.BAT are set to
the above configuration as default. It is only necessary
to EDIT on the Master POS C:\GO.BAT and check
that the following 3 items are set as required :-

@ECHO OFF
set TBDIR=d:\ex

REM ********************************
REM TO SET CASHRSP SPOOL TIMER 
SET SPOOLTMR=5
REM ********************************

REM ********************************
REM TO SET LOYALTY LOGGING 
REM set loylog=g:\loylog
REM ********************************

REM ********************************
REM TO SET HOTEL PMS SYSTEM
REM set htlreq=g:\room
REM set htlrsp=g:\post
REM ********************************

REM ********************************
REM TO SET CHECKLINE EFT SOFTWARE
REM set eftenq=g:\eft\enquire.flg
REM set eftreq=g:\eft\request
REM set eftrsp=g:\eft\response
REM ********************************

REM ********************************
REM TO SET COMIDEA EFT SOFTWARE
REM set eftreq=g:\se1
REM ********************************

REM *********************************

REM EXIT TO DOS

:L90

REM ********************************

REM ********************************
REM TO SET EOD EXPORT PATH
REM NO BACK OFFICE PC INSTALLED
REM set expath=c:\usr\commsout
REM set exback=c:\usr\commsout
REM ********************************

REM ********************************
REM TO SET PLU TRACKING BY MACHINE
REM NO BACK OFFICE PC INSTALLED
REM set plsal1=c:\usr\commsout
REM set plsal2=c:\usr\commsout
REM ********************************

REM ********************************
REM TOUCH SCREEN DRIVER LOAD
touchbox 4000
REM ********************************

REM ********************************
REM GENERAL S98 START BATCH FILE
REM ============================

SET BASDIR=\USR

:L0

if exist post.bat DEL POST.BAT
CD\usr\ex
S98

REM *********************************
REM POST .BAT ROUTINE
IF NOT EXIST POST.BAT GOTO L91
REM === S98 may create a POST batch file
CALL POST
GOTO L0
REM *********************************

REM********EOD BATCH ROUTINE START***************
REM EOD BATCH FILE
:L91
IF NOT EXIST C:\USR\DATA\NOLOGIN.RUN GOTO L90

REM *********************************
REM INSERT LINE BELOW IF AN AFTER EOD ROUTINE IS NEEDED
REM
REM *********************************

REM *********************************
REM REMOVE REM BELOW IF MODEM FITTED
REM
REM N.B Please remember to edit EPOSMAN.BAT if using MODEM
REM
REM CALL C:\USR\EX\C5700H.EXE
REM
REM *********************************

GOTO L0
REM *************EOD BATCH FILE END****************