DOS HOSPITALITY (serv.man34). Upgrade to Ver 3.1.222 (Documentation) - Sharp EPOS Driver / Update. Page 3

3

########################## TM5000 ###############################
TM-5000-R         -    Receipt Printer
TM-5000-RS        -    Receipt Printer with Stub Support
TM-5000-S         -    Slip/Cheque Printer
TM-5000-RE        -    Report Printer

##################### STAR TSP200 ###############################
TSP200-RSO        -    Receipt Printer (OLD STYLE PRINTER)
TSP200-REO        -    Report Printer (OLD STYLE PRINTER)
TSP200-RSN        -    Receipt Printer (NEW STYLE PRINTER)
TSP200-REN        -    Report Printer (NEW STYLE PRINTER)

2.

If after taking a Start of Day, an End of Day is taken immediately, without the session
being opened and closed, the Product Sales File can become invalid. The fix stops this
from occurring.

3.

In Version 3.1.208 we added a line in RINCS.CFG EFTCHANMAX=10, this should have
been EFTMAXCHAN=10. This was to allow the use of other NON-Sharp nodes on the
network to access and use the Commidea EFT Server. However it seems problems can
arise when installing an EFT server if EFTMAXCHAN is not set to the number of EPOS
terminals quoted to Commidea prior to them issuing the software. In future after ordering
a system with 5 EPOS Terminals from Commidea set EFTMAXCHAN to 5 also, this will
stop any “Licence” problems.

As the time taken for the bank to respond to an EFT request may be delayed, it is possible
for the EPOS Terminal to time out, this can lead to EFT transactions being accepted at
the Bank but not at the POS. To alleviate the problem when a timeout is received it is now
possible to RETRY the EFT Server.

RINCS.CFG to set new EFT Settings.

[MTM]
INT=D0
TaskCount=10
SemaphoreCount=20
MessageCount=30
MessageBufferSize=2048
TimeSlice=1
[GCNET]

REM ************REAL TIME UPDATE SETTING************

RTUPDATEPATH=C:\USR\UPINST\produpd.csv

REM **********REAL TIME UPDATE SETTING END**********

REM **************DEPARTMENT SETTINGS***************
REM
REM All settings below refer to Departments but any PLU assigned to the
REM respective department will have the settings of that Department
REM
REM =========MULTI TICKET ISSUE=========
REM