DOS HOSPITALITY (serv.man31). Upgrade to Ver 4.2.085 (Documentation) - Sharp EPOS Driver / Update

dos hospitality (serv.man31) driver / update
Model
DOS HOSPITALITY (serv.man31)
Pages
27
Size
112.45 KB
Type
PDF
Document
Driver / Update
Brand
Device
EPOS / Upgrade to Ver 4.2.085 (Documentation)
File
dos-hospitality-sm31.pdf
Date

Read Sharp DOS HOSPITALITY (serv.man31) Driver / Update online

IMPORTANT NOTICE
Read the Instructions Contained in this Document
Carefully before attempting an Upgrade to a
Customers System
Version 3
To
Version 4
Upgrade Document
Description
Version 4 of the UP5700 Hospitality Software has been developed to improve the functionality
of Version 3 in many ways. The UP5300 can now be used with the Sharp Hospitality Software
supporting the New on board Printer and Pole Display. The improvements to the Software has
meant changes to almost every area of the Software, because of this NO Version 3 files must be
used on the new version 4 without conversion. It is also mandatory that a Version 3 and Version
4 Terminal should not be used together on a System. All Terminals must be of the same Version.
When upgrading an existing Terminal these conversions are all done automatically. New Blank
and Demonstration Applications are available and these should now be used to create new
programs, these programs have already been converted.
Upgrade Method
The Standard 3 to 4 Upgrade DOES NOT support the Waitermate, there is a special extra
Upgrade that will need to be done after Version 4 Upgrade has been done. Please see the attached
documentation re the Waitermate, this is to save Disk Space if the Waitermate is not being used.
As with all Upgrades previously released there are three Batch Files UPFLASH.BAT
UPHDD.BAT . These can be used as follows :-
UPFLASH.BAT
Used to Upgrade a Flash/Ram POS
UPHDD.BAT
Used to Upgrade a Hard Disk POS
UPPC.BAT
Not used on this Upgrade.
N.B In order to make a successful Upgrade the following steps MUST be taken. Failure to
carry out this routine as stated may result in total data destruction.
1.
Install the New Version 4 Installation Disk & Backup And Restore Software onto the PC
being used for Upgrade.
2.
Make a backup of the Customers Data using the New Backup & Restore Software.
3.
Make a note of the POS settings of RINCS.CFG and GO.BAT on the POS before
proceeding
4.
Copy the Upgrade file into a New Folder on your PC and switch to this folder.
5.
Run the relevant Batch file either UPFLASH or UPHDD and follow the instructions
prompted.
6.
The Program will now automatically put all the New files onto the POS. This operation
must be repeated on ALL Terminals on the System.
7.
Re-Boot the POS. A conversion will now take place of all the data files that have been
changed. DO NOT interrupt this routine. After it is completed a prompt will appear to
select The Terminal Network Configuration and Terminal Number. After this has been
done the POS will Re-Boot.
8.
On the POS edit the RINCS.CFG and GO.BAT to restore the values noted in 3.
9.
The Upgrade is now complete.
N.B if any of the above does not function correctly restore the existing Customer Data and carry
out the upgrade again.
Post Upgrade Requirements
After the Upgrade has been completed and the POS Re-Booted, exit the application and enter
FM. In Till Parameters on the Master ALL printer settings that were 99 will have changed to 153.
Reset all of these to 999. This is because Support is now in place for 254 Terminals so all settings
relevant to Terminal Number are 3 Digits Long. After ALL the above has been done the New
Feature can be Introduced to the System.
1.
PLU Sold Out Function
2.
Hold / Release Kitchen Printer Orders
3.
Free Text Entry via On-Screen QWERTY Keyboard. For use with Kitchen Printer Orders
and Reason Codes.
4.
Pouch Cash to System - This function allows the transfer Cash from Waiter Pouches to
the EPOS Terminal.
5.
Multiple Discount’s per transaction.
6.
Differ Sub-Total / Discount for different discount amounts within the same transaction.
7.
Reason Code Entry for Refund Void & VIP (inc Free Entry via QWERTY Keyboard).
8.
User Defined Analysis fields for Products.
9.
Report Screen Viewer - Allows reports to be viewed instead of printed.
10.
Transaction History.
11.
Waitermate - Allows the use of the Hand Held Waitermate Order Entry Pad.
12.
Support for 254 Terminals
13. 
Increase Server Password to 4 Digits.
14
PLU Shift for Eat-in / Eat-out
15.
New Spooler for Bill and EFT and introduction of a Hotel Voucher Printer
For full details on the New Features please refer to the Version 4 Upgrade Program & Operation
Manual.
Page of 27
Display

Download Sharp DOS HOSPITALITY (serv.man31) Driver / Update

Here you can read online and download Sharp DOS HOSPITALITY (serv.man31) Driver / Update in PDF. DOS HOSPITALITY (serv.man31) driver / update will guide through the process and help you recover, restore, fix, disassemble and repair Sharp DOS HOSPITALITY (serv.man31) EPOS. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.