XE-A301. Printer Manual, Parts Guide - Sharp ECR Service Manual (repair manual). Page 13

•

This chapter mainly outlines the procedure for disassembling the
printer. It is advisable to reinstall the printer in the reverse order
from disassembly, referring to "Cautions to be taken when install-
ing." 

•

Some easy steps have been omitted.

•

Only part names are described without indicating their part codes.
For the part codes, refer to the Parts Guide.

1) The parts which need to be greased are indicated in "Cautions to

be taken when reinstalling." Whenever such a part is replaced
with a new one, grease it before installing. 

Lubrication interval (rough guide)

•

Every 6 months

•

Every 2 years or 2,000,000 lines of printing

•

Parts code of lubricant

Lubricant type

PARTS CODE

PRICE RANK

G36

00BB703600001

AU

2) Use caution not to have the gear chipped or deformed when

removing or reinstalling.

3) Do not touch directly the printing head.

4) Be sure to wear an earth band to ground your body.

Fig. 1

No.

PARTS NAME

Q’ty

CUTTER45

1

H-COVER45

1

SCREW (M2

×

8)

3

CAUTION LABEL

1

1) Remove the CUTTER45 

 and H-COVER45 

:

Using a Phillips screwdriver, remove the three SCREWs 

.

Remove the CUTTER45 

 and H-COVER45 

.

The H-COVER45 

 carries the "CAUTION" label 

.

1

2

3

4