XE-A213 (serv.man6). XE-A213 Operation Manual - Sharp ECR User Guide / Operation Manual. Page 96

The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional
faults of the machine.  It is therefore advisable to refer to “Checking” shown in the right-hand column before
calling for service.

When the following error messages are displayed, press the 

l

key and take a proper action according to the

table below.

Fault

Checking

The display wonÕt illuminate even when the mode switch

is turned to any other position than Ò Ó.

¥ Is power supplied to the electrical outlet?

¥ Is the power cord plug out or loosely connected to the

AC outlet?

(2)

The display shows symbols that do not make sense.

¥ Has the machine been initialized properly as shown in

"PREPARING THE CASH REGISTER" on page 9?

(Note that initialization clears all the data and programmed

settings stored in memory.)

(1)

The display is illuminated, but the whole machine

refuses registrations.

¥ Is a clerk code assigned to the register?

¥ Is the mode switch set properly at the ÒREGÓ position?

(3)

No receipt is issued.

¥ Is the paper roll properly installed?

¥ Is there a paper jam?

¥ Is the receipt function in the ÒOFFÓ status?

¥ Is the print roller arm securely locked?

(4)

No journal paper is taken up.

¥ Is the take-up spool installed on the bearing properly?

¥ Is there a paper jam?

(5)

Printing is unusual.

¥ Is the print roller arm securely locked?

Open the print roller arm, and lock the arm by following

the instruction of installation.

¥ Is the paper roll properly installed?

¥ Are the print head/sensor/roller clean?

(6)

Continuous printing stops.

¥ Display shows Ò→ → → → →Ó.

Printing will automatically restart after several seconds.

(7)

10

Error message

Error status

Action

ENTRY ERROR

Registration error

Make a correct key entry.

MISOPERATION

Misoperation error

Make a correct key entry.

NO RECORD

Undefined code is entered.

Enter a correct code.

MEMORY FULL

Memory is full (in the AUTO key programming).  Program the AUTO key within 25 steps.

SBTL COMPUL.

Compulsory depression of the 

s

key for 

Press the 

s

key and continue the operation.

direct finalization

TEND COMPUL.

Compulsory tendering

Make a tendering operation.

NOT ASSIGNED

No entry of a clerk code

Make a clerk code entry.

OVER LIMIT.

Overflow limitation error

Make a registration within a limit of entry.

INH. OPEN PR

The open price entry is inhibited.

Make a preset price entry.

INH. UNIT PR

The preset price entry is inhibited.

Make an open price entry.

NOT NON-TEND

The direct finalization is inhibited.

Make a tendering operation.

BUFFER FULL

1. Subtotal void is not allowed.

Finalize the transaction, and correct the wrong 

entries in the 

mode.

2. GLU item entries are reached to 50 items.

Finalize the transaction.

HEAD UP

Print roller arm is lifted up.

Make sure the print roller arm is surely rocked.

PAPER EMPTY

Receipt or journal paper roll is not

Install a receipt or journal paper.

installed or empty.

EURO CHANGE

EURO modification operation must be 

Execute EURO modification operation (Job code 

executed

800).

 A213_3 FOR THE MANAGER(SEEG)  06.4.28 8:33 PM  Page 94