XE-A213 (serv.man4). XE-A213 Service Manual - Sharp ECR Service Manual (repair manual). Page 8

XE-A203V/A213V

OPTIONS

– 6 –

Master resetting clears the entire memory and resumes initial values.

Master resetting can be accomplished by using the following procedure:

Procedure A:

1) Unplug the AC cord from the wall outlet  or set the

mode switch to OFF Position. 

2) Let the ECR be without the memory back up battery.

3) Wait over 1 muinite for discharging.

4) Set the mode switch to any position except OFF. 

5) Plugin the AC cord to the wall outlet  or turn the

mode switch from OFF Position to another position.

6) Insert batteries before carrying out operation after

master resetting.

The master reset can also be accomplished in the following case.

In case power failure occurs when the machine has no battery
attached to it, the master reset operation is automatically performed
after the power has been restored.

(This is because if power failure occurs with no battery attached to
the machine, all the memories are lost and the machine does not
work properly after power recovery; this requires the master reset
operation.)

This resetting resumes the initial program without clearing memory.

This resetting can be operated at below sequence in PGM mode. 

Procedure:

1) Unplug the AC cord from the wall outlet. 

2) Wait over 1 muinite for discharging. 

3) Set the mode switch to the PGM position. 

4) While holding down the FEED key, plugin the AC

cord to the wall outlet. 

Note: In case power failure occurs when the machine has no battery

attached to it, the master reset operation is automatically per-
formed after the power has been restored.

NO

NAME

PARTS CODE

PRICE 

RANK

DESCRIPTION

1

Thermal roll paper

TPAPR6645RC05

AY

5roll/pack 80

φ

NO

NAME

PARTS CODE

PRICE 

RANK

DESCRIPTION

1

USB Cable