XE-A207 (serv.man3). XE-A207 Service Manual - Sharp ECR Service Manual (repair manual). Page 13

XE-A207/A217/A307

INSTALL

– 11 –

■

For the cash register to operate properly, you must initialize it before programming for the first time.

Follow this procedure.

1) Remove the register from its packing carton.

2) Insert the plug into the AC outlet.

Caution:

•  This operation must be performed without batteries loaded.

• Never install the batteries into the cash register before initializing it. Before you start operating the cash register, you must first initialize it, then

install two new alkaline batteries LR6 (“AA” size) on the register. Otherwise, distorted memory contents and malfunction of the cash register will

occur.

•  Never install the resister in saline areas (e.g.:close to the sea).

Installing the resister in such locations could cause component failure with the corrosion.

1) Display the “Language Selection” after turning on the power.

2) Press the numeric key for the number of your language.

After selecting the language, the register is initialized.

According to the displayed instruction, perform the setting.

1) Display the “DATE/TIME setting”.

2) Enter the date in 6 digits. For example, enter “050611” for June 5,

2011.

3) Press the [ 

4 ] key to select the time setting.

4) Enter the time in 4 digits. For example, enter “1430” for 2:30pm.

5) Press the [TL/NS] key to set the date and time.

1) Select the tax number (1 to 4) to set the tax rate.

2) Enter the tax rate in 7 digits (leading zeros may be omitted). For

example, press the [ 7 ] key to set 7%.

3) To set the second and later tax rates, press the [ 

4 ] key.

4) Press the [TL/NS] key to set the tax rate.

VAT is included in the entered price, and the tax amount is calculated

when tendered according to the VAT rate programmed.
By default, VAT1 is assigned to all items.

The HELP function instructs you how to assign VAT to department. After

pressing the [ 7 ] key, press the [HELP] key to access the HELP.

1) Select the mode to set the pass code using the [ 

2 ] or [ 4 ] keys.

2) Enter the code in 4 digits using the numeric keys.

3) Press the [TL/NS] key to set the mode pass code. 

If no pass code is set, press the [TL/NS] key.

1) Enter the code in 4 digits using the numeric keys.

2) Press the [TL/NS] key to set the manager pass code. 

If no pass code is set, press the [TL/NS] key.

1) To change the default logo text, press the [(DEL)] key to delete the

texts in each line. 
Enter the text using the character keys to print on the receipt.

2) Press the [TL/NS] key to set the receipt logo.

There are two ways for programming text; using character keys on the

keyboard or entering character codes with numeric keys on the key-
board.

You can enter characters according to the small figures printed in the

lower position of the numeric keys.
3 Refer to page 4 “5-1. KEYBOARD LAYOUT”. (XE-A207W/A207B)
3 Refer to page 7  “7-1. KEYBOARD LAYOUT”. (XE-A307)
For example to enter “A”, press the [ 8 ] key. To enter “B”, press the [ 8 ]
key twice.

There are two ways for programming text; using character keys (on the
programming key sheet) or entering character codes with numeric keys

on the keyboard.

To enter numerals, letters and symbols, simply press the corresponding
character on the programming key sheet.

Note: The HELP function instructs you how to set the logo message.

After entering “13”, press the [HELP] key to access the HELP.