Read Sharp XE-A203 (serv.man7) User Guide / Operation Manual online
64
Rounding amount printing (A)
Total amount rounding when a transaction is finalized directly by
Total amount rounding when a transaction is finalized directly by
X
,
Y
,
c
or
b
key(B)
• When you live in Australia, set as shown on the tale below for the parameters A and B.
Rounding up of the unit digit of amount (C)
Rounding down of the unit digit of amount (D)
Rounding down of the unit digit of amount (D)
• Handle C and D as a pair. When you live in Australia, Switzerland, Norway or South Africa, set as shown on
the table below for the parameters C and D.
The rounding is performed as follows:
In case C = 0: Unit digit of amount < or = Value of D — rounding down
The rounding is performed as follows:
In case C = 0: Unit digit of amount < or = Value of D — rounding down
Value of D < or = Unit digit of amount — rounding to 5
In other cases: Unit digit of amount < or = Value of D — rounding down
Value of D < Unit digit of amount < Value of C — rounding to 5
Value of C < or = Unit digit of amount — rounding up
Value of C < or = Unit digit of amount — rounding up
Application of rounding (E)
Limit of the least significant digit in entering amount of item (F)
Memory of difference due to rounding (G)
Limit of the least significant digit in entering amount of payment (H)
Limit of the least significant digit in entering amount of item (F)
Memory of difference due to rounding (G)
Limit of the least significant digit in entering amount of payment (H)
• When you live in Australia, Switzerland, Norway or South Africa, set as shown on the table below for the
parameters E through H.
CD
E
F
G
H
Switzerland
82
Item & payment
0 and 5 only
No
0 and 5 only
Norway
54
Payment
Arbitrary
Yes
0 only
South Africa
05
Payment
Arbitrary
Yes
0 and 5 only
A
B
CD
E
F
G
H
Australia
Yes
Not rounding
82
Payment*
Arbitrary
Yes
0 and 5 only
* Applied to payment by cash and change amount.
Job code: 68
* Item:
Selection:
Entry:
A
Always enter 0.
0
B
Always enter 0.
0
C
Temporary EJ printing during a transaction
Disable
0
Enable*
1
D
EJ printing and clearing EJ data when
No*
0
issuing general Z1 report
Yes
1
E
PGM mode operation records type
Details*
0
Header information only
1
F
REG/MGR/VOID modes operation
Details*
0
records type
Total
1
G
Compressing printing for EJ data
No (normal size)
0
Yes (small size)*
1
H
Action when EJ memory area is full
Continue
0
Continue and warning (near full warning)* 1
Lock and warning (with near full warning)
2
A203_3 FOR THE MANAGER(SEEG) 06.5.6 8:08 PM Page 64
Click on the first or last page to see other XE-A203 (serv.man7) service manuals if exist.