Read Sharp XE-A202 (serv.man3) User Guide / Operation Manual online
14
Single item entries
1. Department entries
The cash register provides a maximum of 50 departments for a merchandise classification. Group attributes,
such as taxable status, are applied to items when they are entered to the departments.
such as taxable status, are applied to items when they are entered to the departments.
• When using the department keys (for department 1 to 32)
For department 1 to 16, enter a unit price and press a department key. If you use a programmed unit price,
press a department key only.
For department 17 to 32, enter a unit price, press the
press a department key only.
For department 17 to 32, enter a unit price, press the
D
key and press a department key. If you use a
programmed unit price, press the
D
key and press a department key.
*
1
Less than the programmed upper limit amounts
When zero is entered, only the sales quantity is
added.
When zero is entered, only the sales quantity is
added.
*
2
For the departments 17 through 32, press the
D
key.
Please note if you press the same key after using the
D
key, it acts as a repeat entry. For
example, when you register an item of dept. 17 using the
D
key and then an item of dept. 1
using the preset unit price, you should use the department code entry key described below for the
dept. 1 item. If you just press the
dept. 1 item. If you just press the
!
key to register dept. 1 item, it will act as a repeat entry of
dept. 17 item.
• When using the department code entry key
Enter a department (dept.) code and press the
d
key, then enter a unit price and press the
d
key again. If
you use a programmed unit price, enter a dept. code and press the
d
key.
*
1
Less than the programmed upper limit
amounts
When zero is entered, only the sales
quantity is added.
amounts
When zero is entered, only the sales
quantity is added.
2. PLU/subdepartment entries
For another merchandise classification, the cash register provides a maximum of 1200 PLUs/subdepartments.
PLUs are used to call up preset prices by a code entry. Subdepartments are used to classify merchandise into
smaller groups under the departments. Every PLU and subdepartment has a code from 1 to 1200, and should
belong to a department to obtain attributes of that department.
PLUs are used to call up preset prices by a code entry. Subdepartments are used to classify merchandise into
smaller groups under the departments. Every PLU and subdepartment has a code from 1 to 1200, and should
belong to a department to obtain attributes of that department.
By default, the cash register is preprogrammed to be able to use 1 to 200 codes, and these 200 codes are set to
PLU mode and zero for unit price.
To extend the number of PLU codes to 1200, please refer to “EJ memory type” on page 41, and for other
PLU/subdepartment programming, refer to “PLU and Subdepartment Programming” on page 29.
PLU mode and zero for unit price.
To extend the number of PLU codes to 1200, please refer to “EJ memory type” on page 41, and for other
PLU/subdepartment programming, refer to “PLU and Subdepartment Programming” on page 29.
Dept. code
(1 to 50)
Unit price *
1
(max. 8 digits)
When using a programmed unit price
(In case only preset price entry is allowed.)
d
d
Department key
Unit price *
1
(max. 8 digits)
When using a programmed unit price
D
*
2
Item Entries
3
A202_2 FOR THE OPERATOR 03.7.5 8:06 AM Page 14
Click on the first or last page to see other XE-A202 (serv.man3) service manuals if exist.