Read Sharp XE-A107 (serv.man3) User Guide / Operation Manual online
22
22
Items
A=1.
(EURO status 1)
A=2.
(EURO status 2)
A=3.
(EURO status 3)
General Z report
Issue
Issue
Issue
GT memory
-
Clear
Clear
*2
Conversion of preset prices of Dept./PLU -
Yes
*1
Yes
*1
Exchange amount printing for total and
change
Yes
Yes
No
Exchange calculation method
Division
Multiplication
Multiplication
Domestic currency symbol
-
[EURO]
[EURO]
Domestic currency decimal point position -
2
2
Exchange currency symbol
[EURO]
Previous domestic
currency symbol
-
*3
Exchange currency decimal point position 2
Previous domestic
currency decimal
point position
-
Rounding of exchange currency
Round off
Round off
Round off
• The item marked with “-” remains the same as the previous data.
*1: If the Automatic conversion of unit prices of Depts./PLUs by automatic EURO migration
operation is set NO (default setting) in EURO Programming, or currency exchange rate is set to
0% (default setting) in Exchange Key Programming, conversion of preset prices of Dept./PLU is
not performed in the Automatic EURO modification operation.
*2: When you perform from EURO status 2, previous data remains unchanged.
*3: When you perform from EURO status 1 or 2, “space” is set.
.
■
IMPORTANT
• After the execution of the procedure with “A=1”, treat EURO as foreign currency using
V
. Set the
EURO conversion rate as the currency conversion rate for
V
.
• After the execution of the procedure with “A=2”, treat EURO as domestic currency and national currency
as foreign currency using
V
. Set the EURO conversion rate as the currency conversion rate for
V
.
• After the execution of the procedure with “A=3”, treat EURO as domestic currency.
• As for the percent rate for
• As for the percent rate for
%
and HALO setting, the automatic conversion is not made. So, when
your domestic currency becomes EURO, you must change these settings so that they are based
on EURO currency.
on EURO currency.
• You can receive the amount of exchange (EURO or national currency) in cheque or credit. For the
programming, please refer to EURO programming on page 26.
• When “Exchange amount printing for total and change” is set to “Yes”, you can display a change
in foreign currency by pressing
V
when the change is displayed in domestic currency.
.
■
Checking.the.current.EURO.status
You can check the EURO status currently set on the cash register. Set the
mode switch to the Z/PGM position, (if necessary, enter the secret code and
press
mode switch to the Z/PGM position, (if necessary, enter the secret code and
press
A
) and perform the following procedure. The current EURO status
will be printed on the receipt or journal.
8:uu
EURO status
Click on the first or last page to see other XE-A107 (serv.man3) service manuals if exist.