Read Sharp XE-A102 (serv.man4) User Guide / Operation Manual online
26
Maintenance
• The display shows symbols that do not
make sense.
• The display will not illuminate even
when the mode switch is not set to “
”.
The machine fails to operate when any
key is pressed.
key is pressed.
• The display is illuminated, but the
machine does not accept key entries.
• Journal paper does not feed properly in
the printer.
• Printing is faded or illegible.
• Was the machine reset in the proper way shown on
page 5?
• Is the power supplied to the electrical outlet? (Plug
in another electrical device.)
• Is the power cord firmly connected to the electrical
outlet?
• Is the mode switch properly set to the REG
position?
• Was the machine reset in the proper way shown on
page 5?
• Is the take-up spool installed properly?
• Is there a paper jam?
• Is there a paper jam?
• Isn’t the ink roller used up?
• Is the ink roller installed properly?
• Is the ink roller installed properly?
Specifications
Problem
Item to check
Model:
XE-A102
Size:
330(W) x 363(D) x 234(H) millimeters
Weight:
5 kg
Power Source:
Official (nominal) voltage and frequency
Power Consumption:
Stand-by: 6.4 W Operating: 13 W
Work Temperature:
0 to 40 °C
Display:
LED (Light-Emitting Diode) numeric display
Printer:
1 station print wheel selective type
Printing Capacity:
Max. 13 digits
Paper Roll:
Width:
57.5 mm ± 0.5 mm
Max. diameter: 80 mm
Paper quality:
Paper quality:
Bond paper
(thickness: 0.06 to 0.085 mm, weight: 47 to 64 g/m
2
)
Cash Drawer:
3 slots for bills, 6 for coins
Accessories (supplied):Paper roll
1 roll
Mode key
2
Drawer lock key
2
Instruction manual
1 copy (this manual)
Quick start guide
1 copy
Ink roller
1 (already installed)
Take-up spool
1
Fixing angle blacket
1
* Specifications and appearance are subject to change without notice.
If you encounter a problem, use this chart before calling for service.
Before Calling for Service
A102_01(E) 05.4.18 9:06 AM Page 26
Click on the first or last page to see other XE-A102 (serv.man4) service manuals if exist.