Read Sharp UP-800 (serv.man63) Driver / Update online
2
After MRS this new parameter is set to “0”.
10. Turnover update
Turnover update is done at Customer advance and Credit customer
advance ordering.
This should be done at payment operation.
advance ordering.
This should be done at payment operation.
In case of Customer advance and Credit customer advance ordering
transaction, Sales data of Department and PLU/EAN are updated at
payment operation.
transaction, Sales data of Department and PLU/EAN are updated at
payment operation.
9. Customer bill contents
Open a GLU and close it by NBAL after item entry.
Re-open the GLU and transfer it to the regular Customer file.
If now the Customer Bill is issued by using "Customer Bill" key only
the Charge amount is printed on the customer bill, but not the
registered items.
Re-open the GLU and transfer it to the regular Customer file.
If now the Customer Bill is issued by using "Customer Bill" key only
the Charge amount is printed on the customer bill, but not the
registered items.
This bug is corrected.
8. UP-820F/N Graphical Logo
At UP-820 the graphical Logo is not printed correctly.
Corrected by new Logo converter V1.01 for UP-820F / N.
7. Scale connection
1. Scale must display always "0" at following positions after
connection, if the UP-8X0 is switched on or after finalization of a
transaction.
2. Time period approx. 15 second after finalization must be
reduced to 1 sec. after each entry in order to go back to the initial
scale display contents.
3. Currently the unit price of a none-scale article is shown in the
"EUR/kg"display area.
connection, if the UP-8X0 is switched on or after finalization of a
transaction.
2. Time period approx. 15 second after finalization must be
reduced to 1 sec. after each entry in order to go back to the initial
scale display contents.
3. Currently the unit price of a none-scale article is shown in the
"EUR/kg"display area.
Items 1), 2), 3) are realized.
For scale connection the ROM version 1.03 must be installed.
For scale connection the ROM version 1.03 must be installed.
6. Terminal freezing
The symptom is caused by the connection of the Scanner to
Channel 2.
Channel 2.
On Master terminal same continuos operation are performed as
follows: PLU / EAN and finalise by Cash.
On Slave terminal same continuous operation are performed as
follows:
“CUST” key, enter existing customer number, Scan EAN and
Customer Charge.
follows: PLU / EAN and finalise by Cash.
On Slave terminal same continuous operation are performed as
follows:
“CUST” key, enter existing customer number, Scan EAN and
Customer Charge.
a. This bug is corrected.
b. For version 1.02 it can be avoided by having the scanner connected
to a channel other than channel 2 (1, 3 or 4).
to a channel other than channel 2 (1, 3 or 4).
Click on the first or last page to see other UP-800 (serv.man63) service manuals if exist.