Read Sharp UP-800 (serv.man53) Driver / Update online
5
6. Terminal freezing
The symptom is caused by the connection of the Scanner to
Channel 2.
Channel 2.
On Master terminal same continuos operation are performed as
follows: PLU / EAN and finalise by Cash.
On Slave terminal same continuous operation are performed as
follows:
“CUST” key, enter existing customer number, Scan EAN and
Customer Charge.
Perform both operations at the same time (two operators).
During the above Master terminal will freeze:
2000 will appear on bottom left of LCD Display.
At this point the Slave terminal will freeze when the Customer
Number is to be entered.
follows: PLU / EAN and finalise by Cash.
On Slave terminal same continuous operation are performed as
follows:
“CUST” key, enter existing customer number, Scan EAN and
Customer Charge.
Perform both operations at the same time (two operators).
During the above Master terminal will freeze:
2000 will appear on bottom left of LCD Display.
At this point the Slave terminal will freeze when the Customer
Number is to be entered.
The system can be locked and only Power “Off” then “On” on the
Master terminal will resolve the problem.
Master terminal will resolve the problem.
a. This bug is corrected.
b. For version 1.02 it can be avoided by having the scanner connected
to a channel other than channel 2 (1, 3 or 4).
to a channel other than channel 2 (1, 3 or 4).
5. Mismatching between Customer Preset file and Sales File
When the customer preset data is downloaded via
ONLINE/MWS/SD, it caused to mismatch the record between
customer Preset file and Customer Sales File.
ONLINE/MWS/SD, it caused to mismatch the record between
customer Preset file and Customer Sales File.
This bug is corrected.
4. MWS Port No.
It is not possible to define different MWS port nos. (49152 und
49168 – 65535) within a network system and location.
49168 – 65535) within a network system and location.
This bug is corrected.
3. Drawer opening
Condition
Clerk 1 is assigned to Drawer 1
Clerk 2 is assigned to Drawer 2
CCD for Individual Clerk is set to compulsory
-----------------------------------------------------------
REG mode entry
1. Clerk 1 signed on
2. Item registration and finalised by payment key
Clerk 1 is assigned to Drawer 1
Clerk 2 is assigned to Drawer 2
CCD for Individual Clerk is set to compulsory
-----------------------------------------------------------
REG mode entry
1. Clerk 1 signed on
2. Item registration and finalised by payment key
This bug is corrected.
Click on the first or last page to see other UP-800 (serv.man53) service manuals if exist.