Read Sharp UP-800 (serv.man50) Driver / Update online
UP-800/810/820 - Overview
Description
V1.02
V1.03
V1.04
Sometimes the drawer doesn’t open (various situations)
001
Yes
Yes
Sometimes the wrong drawer open at CCD-entry
No
Yes
Yes
The alternative - kitchenprinter will be used not before 60 sec.
and not before confirmation. Faster printing and without
confirmation is needed.
and not before confirmation. Faster printing and without
confirmation is needed.
No
Yes
Yes
In case of failure of a TMT-88-kitchenprinter the warning
doesn’t appear before 60 seconds. Delay-time has to be shorter
doesn’t appear before 60 seconds. Delay-time has to be shorter
No
Yes
Yes
Void-operations are not stored in the T-Log.
At SRV-parameter #987-C +1 has to be set.
At SRV-parameter #987-C +1 has to be set.
No
Yes
Yes
Turnover for customers and credit-customers is updated at
advance-ordering.– this has to be done not before payment-
activity
advance-ordering.– this has to be done not before payment-
activity
No
Yes
Yes
Sometime no articles are printed on customer-bill.
No
Yes
Yes
If an EAN-scanner is connected to port 2, it may happen that
master and satellites are freezing after satellite-transactions.
Since V1.03 also port 2 my be used.
master and satellites are freezing after satellite-transactions.
Since V1.03 also port 2 my be used.
001
Yes
Yes
During download of customer-preset-file a mismatch to the
customer-sales-file-data may occur.
customer-sales-file-data may occur.
No
Yes
Yes
The programming of port-numbers in MWS-operations doesn’t
work.
work.
No
Yes
Yes
At scanning of EAN-13-articles with AddOn-code, the quantity
will not be printed correctly, if an 80mm-printer is used. All
prices are printed and calculated correctly.
will not be printed correctly, if an 80mm-printer is used. All
prices are printed and calculated correctly.
No
No
Yes
After some time, printing only will be done jerkily. Temporary
remedy possible via program-reset.
remedy possible via program-reset.
No
003
004
004
Yes
The promotion value may be unable to be discounted.
If the two products for which promotion value discount is set
are purchased, the second product may not be discounted. Only
the first product is discounted.
If the two products for which promotion value discount is set
are purchased, the second product may not be discounted. Only
the first product is discounted.
No
No
Yes
When the customer learning function is performed, the entered
name and address of the customer are not recorded in the
customer file.
name and address of the customer are not recorded in the
customer file.
No
No
Yes
At scanning of EAN-13-articles with AddOn-code, the quantity
will not be printed correctly, if an 80mm-printer is used. All
prices are printed and calculated correctly.
will not be printed correctly, if an 80mm-printer is used. All
prices are printed and calculated correctly.
No
No
Yes
If “Ping” is received from the WAN side, hang-up may occur.
No
No
Yes
The drawer open sensor detection method in drawer diagnosis
has to be changed.
has to be changed.
No
No
Yes
Click on the first or last page to see other UP-800 (serv.man50) service manuals if exist.