Read Sharp UP-600 / UP-700 (serv.man45) Driver / Update online
3.2 02FD
No
Procedure on P.C. side
No
Procedure on POS side
1
Install “02FD.EXE” on the P.C.
ALL RAM Data UpLoad : Go to "2"
ALL RAM Data DownLoad : Go to "9"
ALL RAM Data DownLoad : Go to "9"
2
ALL RAM Data UpLoad
Connect P.C. and POS (CH2) via RS232. (Fig 1)
2
Enter the SRV mode.
Select " 2 SETTING ".
Select " 14 BACKUP SEND"
Select " 2 SETTING ".
Select " 14 BACKUP SEND"
3
POS shows
4
Execute “02FD .EXE” on P.C.
*Don't execute the other Software at the same time.
*Don't execute the other Software at the same time.
5
Set the Communication method by "Setting" Button.
Push "OK" Button.
6
Push "POS -> PC" Button.
And Select the Receiving File.
And Select the Receiving File.
7
Communication starts.
7
Push TL key. P O S shows
8
UpLoad is comp leted.
The initial Window is shown.
The initial Window is shown.
Push "Exit" Button.
8
UpLoad is completed.
The SETTING menu is shown.
The SETTING menu is shown.
SEND DATA ALL RAM
SPEED PROGRAMMED SPEED
SPEED PROGRAMMED SPEED
BACKUP SEND
SENDING 00000
Click on the first or last page to see other UP-600 / UP-700 (serv.man45) service manuals if exist.