Read Sharp UP-600 / UP-700 (serv.man27) User Guide / Operation Manual online
120
■
PLU/EAN stock
You can assign a stock quantity to each PLU/EAN code.
Shown below is an example of selecting “1 OVER WRITE.”
Shown below is an example of selecting “1 OVER WRITE.”
After selecting “1 OVER WRITE,” select a pertinent PLU/EAN code. Then
the next screen will appear to show the following items:
the next screen will appear to show the following items:
• CURRENT ST
The current stock is displayed.
• NEW STOCK (Use the numeric entry)
Enter a new stock quantity (max. 7 digits: 1 to 9999.999(9999999))
• If you need to add or subtract a stock quantity to or from the current stock
quantity, select “2 ADD” or “3 SUB” and enter a value to be added or
subtracted.
subtracted.
• You cannot enter any values for the item marked with “!”.
• The entry of a new stock value will update to the PLU/EAN stock counter.
• The entry of a new stock value will update to the PLU/EAN stock counter.
NOTE
The screen continues in
the same format as those
screens shown in section
“PLU/EAN”.
the same format as those
screens shown in section
“PLU/EAN”.
■
PLU range
You can make a recipe table which contains up to ten ingredients.
Enter a value or select an option for each item as follows:
• START (Use the numeric entry)
Starting PLU code (max. 5 digits)
• END (Use the numeric entry)
Ending PLU code (max. 5 digits)
• OPERATION (Use the selective entry)
MAINTE.:
Enables you to change the setting you have
programmed.
programmed.
NEW&MAINTE.: Enables you to change the current setting when the
specified codes have already been created or to
create new codes when the specified codes have not
been created yet.
create new codes when the specified codes have not
been created yet.
DELETE:
Enables you to delete a specified range of PLUs.
Procedure
Select a pertinent PLU
code, or directly enter a
PLU code or EAN code.
code, or directly enter a
PLU code or EAN code.
▼
Procedure
▼
▼
Click on the first or last page to see other UP-600 / UP-700 (serv.man27) service manuals if exist.