UP-600, UP-700 (serv.man23). UP600-700 Program Manual - Sharp ECR Service Manual (repair manual). Page 46

Before trying to perform inline setup, make sure to create (or delete)
the files required by the inline system using the following procedure:
[SRV MODE] - [2 SETTING] - [10 FILE]. And then perform inline
setup.

DISPLAY: SRV mode screen

Select "3 IRC SET UP" and press the ENTER key.

DISPLAY: IRC SET UP item selection screen

Select the item and press the ENTER key.

The item setting input screen is displayed.

DISPLAY: Setting item selection screen

Select the item to be changed and press the ENTER key.

The contents of setting are shown in the table below.

DISPLAY: Setting screen

Select the item to be changed and press the ENTER key.

The setting content is described below.

DISPLAY

TEXT

CONTENTS

SELECT ITEM

MRS

IP ADDRESS 1

192

IP ADDRESS 2

168

IP ADDRESS 3

000

IP ADDRESS 4 Terminal No.

001-254

000

CLERK

Clerk system

CENTRALIZED CENTRALIZED

INDIVIDUAL

GLU

GLU system

CENTRALIZED CENTRALIZED

INDIVIDUAL

OTHER SAVE
FILE

Other save file

EXIST

NOT

NOT

BACKUP
MASTER

Backup
master function

EXIST

NOT

NOT

Regarding IP address 1-3, use the same address for all machines
(master, back-up master, and satellites) on the inline system.

For IP address 4, enter the terminal No. on the inline system.

When all the machine are set, press the [TL] key.

The [IRC SET UP] screen appears to start the setup.

DISPLAY:

IRC SET UP

1: SAVE FILE DELETE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE