Read Sharp UP-600 / UP-700 (serv.man23) Service Manual online
[JOB#925] : UP-600/700 MRS=0100 : INLINE
PROGRAMMING AREA
925-A: 1. Selection of the method of daily total general consolida-
tion resetting at the master.
Method -1 :
Method -1 :
Those data that has individually been reset
and the current sales data are reset to-
gether.
and the current sales data are reset to-
gether.
Method -2 :
Only those data that has individually been
reset is reset.
reset is reset.
2. Clearing of the individual resetting memory at the time of
consolidation daily total general resetting.
3. Execution of RESET CLEAR when consolidation daily to-
tal general resetting has not been taken.
1.
2.
3.
Method -1
Yes
Disable
0
★
★
Enable
1
No
Disable
2
Enable
3
Method -2
Yes
Disable
4
Enable
5
No
Disable
6
Enable
7
925-B: 1. Any entry operation is inhibited until RESET CLEAR is
executed after consolidation daily total transaction reset-
ting has been taken.
ting has been taken.
2. Various individual resetting
1.
2. Various individual
resetting
Yes
Disable
0
Enable
1
★
★
No
Disable
2
Enable
3
This programming is effective, when JOB#924-B is set to "Save file
except for PLU" = Exist".
except for PLU" = Exist".
925-C: 1. Report printing when consolidation daily and periodic total
transaction reading or resetting is taken
1. Report printing when consolidation daily
and periodic total transaction reading or
resetting is taken
resetting is taken
Printing of both i.e. reports on individual
machines and consolidation report on the
entire system
machines and consolidation report on the
entire system
0
★
★
Printing of consolidation report on the entire
system
system
1
Printing of report on individual register
2
925-D: 1. Resetting in the open store state.
1. Resetting in the open store state.
Disable
0
★
★
Enable
1
[JOB#926] : UP-600/700 MRS=0000
926-A: 1. Void item print on KP that has already ordered.
1. Void item print on KP that has already
ordered.
Yes
0
★
★
No
1
926-B: 1. Program reset in PGM2 mode.
2. Sending " REFUND DATA " on KP.
1. Program reset in
PGM2 mode.
2. Sending
" REFUND DATA "
on KP.
on KP.
Disable
Yes
0
★
★
No
2
Enable
Yes
4
No
6
#926-C: 1. Open store / Close store at stand alone POS with online
2. Send AT command string with "Open Store" job
3. Send AT command string with "Close Store" job
3. Send AT command string with "Close Store" job
1.
2.
3.
No
No
No
0
★
★
Yes
1
Yes
No
2
Yes
3
Yes
No
No
4
Yes
5
Yes
No
6
Yes
7
#926-D: 1. Check VP format
1. Check VP
Normal
0
★
★
French check
2
[JOB#927] : UP-600/700 MRS = 0000
#927-A: 1. Rounding up of the units digit of amount
#927-B: 1. Rounding down of the units digit of amount
1. Rounding the units digit of amount
Common destination
00
★
★
Netherlands/Switzerland
82
Norway
54
Click on the first or last page to see other UP-600 / UP-700 (serv.man23) service manuals if exist.