Read Sharp UP-600 / UP-700 (serv.man21) Service Manual online
6
REMOVE THE HARDWARE PARTS
Fig. 16
[PARTS LIST]
No.
PARTS NAME
Q’ty
MICRO S/W UNIT
1
PWB UNIT
1
SCREW (M2
×
12)
1
MOTOR (PR58H)
2
SCREW (M3
×
6)
4
SCREW (M3
×
5)
1
HOUSING 58H
1
[DISASSEMBLY METHOD]
<MICRO SWITCH>
1) Remove the connector cable of the MICRO S/W UNIT
from
the connector CON5 (2 pins) of the PWB UNIT
.
2) Remove the SCREW
and the MICRO S/W UNIT
.
<JOURNAL SIDE MOTOR>
1) Remove the connector cable of the MOTOR
from the con-
nector CON5 (6 pins) of the PWB UNIT
.
2) Remove the two SCREWs
and the MOTOR
.
<RECEIPT SIDE MOTOR>
1) Remove the connector cable of the MOTOR
from the con-
nector CON7 (6 pins) of the PWB UNIT
.
2) Remove the two SCREWs
and the MOTOR
.
<PWB UNIT>
1) Remove the SCREW
and the PWB UNIT
.
[Cautions to be taken when reinstalling]
1. Wire the MICRO SWITCH UNIT
cable as shown below.
Secure the MICRO S/W UNIT
with the SCREW
(tighten-
ing torque: 4.0 kgf-cm).
Fig. 17
2. Wire each cable as shown below.
Fig. 18
3
2
1
4
5
6
4
5
7
Wire the MICRO SWITCH
cable as shown in the figure.
cable as shown in the figure.
3
Receipt motor
cable
cable
Journal motor
cable
cable
Micro switch
cable
cable
Twist the
cable.
cable.
Twist the
cable.
cable.
Earth cable
CN6
CN7
CN3
CN2
CN5
Push the cables into the grooves.
Click on the first or last page to see other UP-600 / UP-700 (serv.man21) service manuals if exist.