Read Sharp ORDERMAN (serv.man4) Service Manual online
9
Programming at the UP-8x0
Orderman related programming has to be done only at that ECR where the base-station is
connected.
connected.
The programming of the UP-8x0 is divided in SRV- and PGM-programming.
SRV-Programming
CAUTION: During SRV-programming the communication to and from the base-station is
inhibited.
inhibited.
Orderman-Mandatory-Setting
Important: There are some programmings that are mandatory for Orderman-usage.
• SRV#909D set to “Transaction in progress” = (-1) 0000.
• UP-8x0 must be setup for overlapped-clerk-registrations.
This has to be done in SRV-mode via creation of the filing-group 107 and
parameter SRV#910A set to (+1) 1000.
parameter SRV#910A set to (+1) 1000.
• SRV#919B “Entry of the number of guests” set to inhibit = (-2) 4100.
• SRV#981C must be set to “Final key is Total Status Key in GLU” = (+2) 0020.
• SRV#981C is recommended for “PLU group 0 setting” set to disable = (-1) 0020.
• SRV#987D set to “No GLU Subset Code” = (-4) 0200.
• PGM-2 – 02 Settings – 04 MEDIA – 3 CREDIT set for each available Credit the
“AMOUNT ENTRY” to COMPULSORY
Click on the first or last page to see other ORDERMAN (serv.man4) service manuals if exist.