Read Sharp ER-A610 (serv.man20) Technical Bulletin online
(For V)
SSP Setting Procedures
1) Set to SRV MODE, enter 130
→
TL, and check ROM VERSION NUMBER. (See printing example.)
2) Set SSP according to SSP setting data shown in this bulletin.
3) Compare a receipt printed out with the set data and check for errors.
4) If any errors are found, correct the SSP data by means of the key sequence below.
991
→
[
•
]
→
[ X ]
→
XXX
→
[ X ]
→
YYY
→
[ST]
→
[TL]
XXX: STEP No. YYY: SSP DATA
5) Switch the AC power off and the on to invoke the SSP.
Printing example:
130
S-ROM 27040RAJ1A
ROM VERSION No. is underlined.
(In this case, VERSION No. is RAJ1A.)
(In this case, VERSION No. is RAJ1A.)
2/10
Click on the first or last page to see other ER-A610 (serv.man20) service manuals if exist.