Read Sharp ER-A570 (serv.man17) Technical Bulletin online
SSP Setting Procedures
<1> Set the machine to SRV MODE, and input 400 - TL, then confirm the ROM
VERSION NUMBER. (Please refer to the display example provided.)
<2> Carry out the SSP settings in accordance with the SSP setting data provided in
the supplementary document.
<3> Check the print-out receipt with the set DATA to confirm that there are no errors.
<4> In cases whereby an error is detected, carry out correction operations to the
SSP DATA by using the key sequence described below.
991
→
[
•
]
→
[ X ]
→
XXX
→
[ X ]
→
[ YYY ]
→
[ ST ]
→
[ TL ]
<5> When inserting or pulling out the AC plug to and from the electrical outlets,
the power supply should first be turned OFF, then turned ON once again.
Example Display:
400
S-ROM
27020RAN1A
XXX: STEP No. YYY: SSP DATA
The underlined portion is the ROM VERSION No.
(In the case of this example, the VERSION No. Is “RAN1A”.)
(In the case of this example, the VERSION No. Is “RAN1A”.)
2/4
Click on the first or last page to see other ER-A570 (serv.man17) service manuals if exist.