Read Sharp ER-A450S (serv.man8) User Guide / Operation Manual online
8
PRINTER
The printer is a receipt/journal dual station type thermal printer, and therefore it does not require any type of ink
ribbon or cartridge. The average life of the printer is approximately 5 million lines.
ribbon or cartridge. The average life of the printer is approximately 5 million lines.
When removing the printer cover, lift up its rear. When
installing the printer cover, hook it on the pawls on the
cabinet and shut it.
installing the printer cover, hook it on the pawls on the
cabinet and shut it.
Your register is shipped with the print head release lever
held by a white retainer in the lifted up position. Be sure to
remove this retainer (see the figure at the right) and push
down the print head release lever before you use the
register.
held by a white retainer in the lifted up position. Be sure to
remove this retainer (see the figure at the right) and push
down the print head release lever before you use the
register.
Print head release lever
The print head can be lifted by the green lever on the right side of the printer. Pulling the lever forward lifts the
print head up. If the paper becomes jammed and you need to move the head farther forward, you can pull the
lever even further toward you and proceed with the removal of the jammed paper.
The print head can be lifted by the green lever on the right side of the printer. Pulling the lever forward lifts the
print head up. If the paper becomes jammed and you need to move the head farther forward, you can pull the
lever even further toward you and proceed with the removal of the jammed paper.
Do not attempt to remove the paper roll with the head in the down position. This may result in
damage to the printer and print head.
damage to the printer and print head.
Note
Retainer
Paper roll location
Take-up spool
Print head
release lever
release lever
Paper chute
Click on the first or last page to see other ER-A450S (serv.man8) service manuals if exist.