Read Sharp ER-A410 / ER-A420 (serv.man4) Service Manual online
ER-A410/ER-A420
SERVICE (SRV) MODE
1 – 14
Display during transmission
At the end of the job, one of the following messages is printed.
• Normal termination of a send operation
• Communication Error in a send operation
• Time-out in a send operation
• Normal termination of a receive operation
• Communication Error in a receive operation
• Data format Error in a receive operation
• Time-out in a receive operation
*
All error message are fixed.
*
ERROR CODE:
[JOB#985]
Euro symbol programming for TM-295
MRS = 0 (Space)
[JOB#986] ER-A410: MRS = “
*
”
ER-A420: MRS = “
*
”
Domestic currency symbol programming
Characters can be entered by using character keys or numeric keys.
Please refer to section 4.
This symbol is printed with (+) amount of domestic currency. The pro-
grammed characters is printed at left side of amout.
If some space characters are programmed at the left side of symbol
(like “
*
”), they are not counted as the number of character of the cur-
rency symbol. (In case of “ DM”, the number of character is 2.)
[JOB#987] ER-A410: MRS = 0
ER-A420: MRS = 0
Text Changing (To Default text)
X: 0 = English text
1 = German text
2 = French text
3 = Spanish text
When this job is executed, below s are set as default data.
(a) Function text
(b) Each message text (LOGO, etc..)
[JOB#989]
Resetting of all counter and totalizer
*
All counter, totalizer, all GTs, and all Z counter are reset.
#996 SEND OK
JOB#, ERROR MESSAGE
#996 COM. ERROR
01 JOB#, ERROR, MESSAGE,
ERROR CODE
#996 TIME OUT
JOB#, ERROR MESSAGE
#998 RECEIVE OK
JOB#, ERROR MESSAGE
#998 COM. ERROR
01 JOB#, ERROR MESSAGE,
ERROR CODE
#998 DATA ERROR
15 JOB#, ERROR MESSAGE,
ERROR CODE
#998 TIME OUT
JOB#, ERROR MESSAGE
01 = ID No. error (ID No. in IDENQ is not correct.)
02 = Parity error
03 = Check sum error
04 = Data size error
05 = Hardware error
06 = Power off error
07 = Time out error
08 = DSR off error
11 = Transmit data size error
12 = Block sequence error (Irregular sequence No. has been
received.)
13 = NAK code error (NAK code has been received.)
15 = ECR TYPE error (Models of two ECR is different.)
996
SRV
TEXT, MODE
JOB#, PACKET NO.
JOB#, PACKET NO.
998
SRV
TEXT, MODE
JOB#, PACKET NO.
JOB#, PACKET NO.
X: 0 = Space
1 = Euro symbol
Ex)
Case of “DM”:
DEPT.01 DM1.00
Programmed symbol
Ex)
Case of “ DM”: (The currency symbol means “DM”)
DEPARTMENT01 DM10.00
Programmed symbol
985
A
0
TL
986
Character Key
(4 chara.)
(4 chara.)
Space
TL
987
X
TL
0
989
TL
Click on the first or last page to see other ER-A410 / ER-A420 (serv.man4) service manuals if exist.