DV-RW260H (serv.man3). Complete - Sharp DVD Service Manual (repair manual). Page 13

Read Sharp DV-RW260H (serv.man3) Service Manual online

DISASSEMBLY INSTRUCTIONS
B1-1
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: TOP CABINET AND FRONT CABINET
(Refer to Fig. 1-1)
1.
2.
3.
4.
5.
6.
7.
Remove the 5 screws 
1
.
Remove the Top Cabinet in the direction of arrow (A).
Disconnect the following connectors: (CP654, CP681).
Unlock the 8 supports 
2
.
Remove the Front Cabinet in the direction of arrow (B).
Remove the 5 screws 
3
.
Remove the Operation 1/2 PCB in the direction of
arrow (C).
1.
2.
Open Flap to 90˚ and flex in direction of arrow (A), at
the same time slide in direction of arrow (B).
Then lift in direction of arrow (C).
1-2: FLAP (Refer to Fig. 1-2)
Fig. 1-1
1
1
1
1
(A)
2
(B)
1
Top Cabinet
Front Cabinet
2
2
2
2
2
3
Operation 1 PCB
(C)
2
3
3
Fig. 1-2
(A)
Flap
(B)
(C)
2
NOTE
After the set assembling, perform the following process so
that the wires don’t touch to the heating parts.
1.
2.
3.
Bind the CD7304, CD504 and Fan motor cable at the
Fig. 1 position and fix them.
Pass the Fan motor cable through before the CD502
like the Fig. 1.
Pass the CD7304 through under the CD502 them plug
in the connector like the Fig. 2. (Because, this prevent
from the contact with the VCR Deck.)
Fig. 1
CD504
Fan motor cable
Fix
Fig. 2
CD7304
Fix
CD502
CD7304
(C)
3
3
Operation 2 PCB
Page of 116
Display

Click on the first or last page to see other DV-RW260H (serv.man3) service manuals if exist.