DV-RW250H (serv.man6). Cover, Contents, Before using your unit - Sharp DVD User Guide / Operation Manual. Page 17

TV

TV

Coaxial digital cable (not supplied)

AV Amplifier with
built-in various
decoder as above

VCR/DVD

To Audio (L) Input
To Audio (R) Input

AUDIO Cord (not supplied)

Stereo Amplifier

VCR/DVD

Audio (R) Output

SCART-cable (supplied)

Audio (L) Output

Coaxial digital
Audio Output

To SCART
input

SCART-cable (supplied)

To SCART
input

TV Scart socket (AV1)

If your VCR/DVD is connected to a stereo amplifier, the video soundtrack can output through the loudspeakers of
the stereo system.

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
such as Dolby Digital and DTS by using the Coaxial Digital Output.

NOTES:
• The COAXIAL jack only outputs the audio from the DVD section.

VHS signal is output only from the SCART-sockets and AUDIO L/R jacks.

• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV

Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the
speakers to be damaged.

• DTS audio is only output via the COAXIAL output jack. You therefore need to connect this unit to a suitable DTS

decoder in order to hear the audio from DTS discs.
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

TV Scart socket (AV1)

  2D50901A P12-18

7/20/04, 12:23 PM

17