DV-NC55 (serv.man49). Chapter 1 - General information and Contents (1-18) - Sharp DVD User Guide / Operation Manual. Page 5

Read Sharp DV-NC55 (serv.man49) User Guide / Operation Manual online

6
Web-site:www.sharp.co.uk/support   Help line:08705 274277 (office hours)
SAFETY INFORMATION
Location and Handling
• Do not place your Unit in enclosed spaces or do
not cover it to prevent excessive temperatures
inside the unit.
• Do not place the Unit in direct sunlight, or near heat
sources.
• Keep the Unit away from strong magnetic fields, i.e.
loudspeakers etc.
• Do not place any object containing water or other
liquids on the Unit. In the event that liquid should
enter the cabinet, unplug the Unit immediately and
contact the retailer or service centre approved by
SHARP immediately.
• Do not remove the Unit cabinet. Touching parts
inside the cabinet could result in electric shock and/
or damage to the Unit. For service and adjustment
inside the cabinet, call a qualified dealer or service
centre approved by SHARP.
Periods of no use
When the unit is not being used, switch the unit to the
Standby mode.
When left unused for a long period of time, the unit
should be unplugged from the household AC socket.
No Fingers or Other Objects Inside
Do not put any foreign object on the disc tray.
Stacking
Place the unit in a horizontal position, and do not
place anything heavy on it.
Condensation
Moisture may form on the pickup lens in the following
conditions:
• immediately after a heater has been turned on.
• in a steamy or very humid room.
• when the unit is suddenly moved from a cold
environment to a warm one.
If moisture forms inside this unit, it may not operate
properly.
In this case, turn on the power and wait about one
hour for the moisture to evaporate.
Cleaning
Unplug your Unit before cleaning. Use a damp cloth
for cleaning. Do not use cleaning fluids or aerosols
which could enter the unit and cause damage, fire, or
electrical shock. These substances may also deterio-
rate the finish of your Unit.
If there is Noise Interference on the
TV While a Broadcast is being
Received
Depending on the reception condition of the TV,
interference may appear on the TV monitor while you
watch a TV broadcast and the unit is left on. This is
not a malfunction of the unit or the TV. To watch a TV
broadcast, turn off the unit.
Service
Do not attempt to service this Unit yourself. Please
refer any service to the nearest service centre
approved by SHARP.
Copyright
Recording and playback of any material may require
consent.
Please refer particularly to the provisions of the
Copyright Act 1956, the Dramatic and Musical
Performers Protection Act 1958, the Performers
Protection Acts 1963 and 1972 and to any subse-
quent statutory enactments and orders.
®
 and PlusCode
®
 are registered trade-
marks of Gemstar Development Corporation.
 system is manufactured under license
from Gemstar Development Corporation.
 
NEX
TV
IEW
TM
Copy Protection
This Unit supports Macrovision copy protection.
On DVDs that include a copy protection code, if the
contents of the DVD are copied using a VCR, the
copy protection code prevents the videotape copy
from playing normally.
Apparatus Claims of U.S.Patent Nos. 4,631,603,
4,577,216, 4,819,098 and 4,907,093 licensed for
limited viewing uses only.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Recommended Measures for
Optimum Picture Excellence
The unit is a precision device that is constructed
using extremely accurate technology.
Soiling or friction affecting the pickup lens or disc
drive can impair the image quality. In the worst case,
neither video or audio will be played back. To obtain
optimum picture quality, the Unit should be checked
(cleaning and replacement of some parts) every
1,000 hours. Note that this period varies depending
on the environment (temperature, humidity, dust, etc.)
in which the Unit is used. Contact your authorized
Sharp supplier for details.
Do not attempt to clean the pickup lens yourself.
DVNC60H(E)#003_008.pm6
19/09/2001, 10:07
6
Page of 17
Display

Click on the first or last page to see other DV-NC55 (serv.man49) service manuals if exist.