DV-NC100H (serv.man8) - Sharp DVD User Guide / Operation Manual. Page 14

Tracking Adjustment
• Tracking adjustment will be activated automatically (Digital

Tracking function) when you start playback.

• When playing pre-recorded tapes or tapes recorded on

units other than your own, noise lines (black and white
streaks) may appear on the playback picture. If this occurs,
you can adjust the tracking control manually by pressing
CH (o

o

/p

p

) until the streaks disappear. To return to the DTR

function, stop the tape once and start playback again.

• You can reduce the noise lines by pressing CH (o

o

/p

p

) in

Slow mode, too. Slow tracking adjustment is not set auto-
matically.

• In the Still mode, press SLOW, and press CH (o

o

/p

p

) until

the streaks disappear. To return to the Still mode, press the
STILL/PAUSE again.

Turn on the TV and select the video channel on the TV.

Insert a prerecorded tape.
The VCR/DVD will turn on automatically. If the erase-pro-
tection tab has been removed, the VCR mode will start
playback automatically.

• If the VCR/DVD power was already on, press VCR to

switch to VCR mode.

If playback does not start automatically, press VCR, then
press PLAY to begin playback.

• Tracking adjustment will be activated automatically

(Digital Tracking function) when you start playback. To
adjust the tracking manually, press CH (o

o

/p

p

).

<If a tape is already in the VCR/DVD...>

• Using the buttons on the VCR/DVD

Just press PLAY on the VCR/DVD. Power will auto-
matically turn on and playback will start. (Direct Button
Operation)

• Using the buttons on the remote control

Press OPERATE to turn on, and then press PLAY.

Press STOP to stop playback.

• To remove the tape, press EJECT.

During playback, press FWD D

D

or REV E

E

to view a

videotape at a high speed in either a forward or reverse
direction. In this mode, the sound will be muted.
Press the button again, the VCR/DVD will now search in
super high speed. (This function will not operate for a
NTSC tape.)
Press PLAY to return to normal playback.

Still Picture
Press STILL/PAUSE during playback to view a still picture
on the TV screen.
• When the picture begins to vibrate vertically, stabilize the

picture by pressing the CH (o

o

/p

p

) in the Still mode.

• After the VCR/DVD has been in Still mode for 5 minutes, it

will stop automatically to protect the tape and the video
head.

Ensure that all VCR setting begins in VCR mode by pressing
VCR. (Make sure that the VCR OUTPUT indicator is lit.)

– 14 –

EN

You can replace two channels.

Press VCR, then MENU.
Press K or L to select INITIAL, then press B.
Press K or L to select “CH TUNING”, then press B.
Press K or L repeatedly to select “MOVE”, then press B.
Press the K or L repeatedly to select the position number
you want to change the channel, then press B.

• You cannot select a position number where “- - - ”

appears next to the number. This is because SKIP is
set to [ON] for this position number.

• When a weak signal is received in Channel

Reprogramming mode, you can change the back-
ground to static blue by pressing CLEAR/C-RESET.
If you press the button again, the background will
return to the static screen.

Press K or L repeatedly until the channel move to another
position number, then press B.

Press the MENU.

• Usually there will be video “noise” lines (black and white

streaks or dots) on the screen. This is normal.The still
picture will, in addition to containing the “noise” lines,
be black and white.This is not a fault of the machine
but merely a by-product of the technology involved in
producing a VCR with LP mode.

Slow Motion
• Press SLOW to reduce the playback speed. The VCR/DVD

mutes the sound during slow motion. You can control the
speed by pressing FWD D

D

(faster) or REV E

E

(slower).

Press PLAY to return to normal playback.

• If it is left in the Slow mode for more than five minutes, the

VCR/DVD will automatically switch to the Stop mode.

Insert a cassette tape with its erase-prevention tab in
place. (If necessary, rewind or fast forward the tape to the
point at which you want to begin recording.)
Press the numerical buttons or CH (o

o

/p

p

) to select the

channel to be recorded.
Press TAPE SPEED to select the tape speed (SP/LP).
Press REC/OTR to begin recording.

• The REC indicator on the display comes on.

Press STOP when recording is completed.

Press STILL/PAUSE when you want to temporarily halt

recording.

• You can check the remaining pause time with 

marks

on the TV screen. Each 

mark represents 1 minute.

After 5 minutes, the VCR will automatically switch to
the Stop mode to prevent tape damage.

Press STILL/PAUSE or REC/OTR to resume recording.

You can record one programme while viewing another. To
start recording, follow steps 

to 

under “Viewing and

Recording the same Programme”. Then, set the TV to the
channel you want to watch.

Select the video channel on the TV.

You can record in continuation from previous programme on
a pre-recorded tape.

Insert a pre-recorded tape. Press PLAY to start playback.
Press STILL/PAUSE at the desired point on the tape.
Press REC/OTR. The VCR/DVD will be the Recording
Pause mode.
Press CH (o

o

/p

p

) to select the channel to be recorded .

Press REC/OTR or STILL/PAUSE. The recording will
begin.
Press STOP when recording is completed.

H9741BD(EN).qx4  04.5.12  16:03  Page 14