Read Sharp DV-HR350H (serv.man4) User Guide / Operation Manual online
71
9
Press Red (B) (CONFIRMING) to
confirm the contents.
confirm the contents.
• The title is played back without the
scene to be erased.
Press Yellow (D) (ERASE) to
erase.
erase.
• Go to step 10.
• Press RETURN to cancel scene
• Press RETURN to cancel scene
erase.
10
Press \ to select “YES”, then
press SET/ENTER.
press SET/ENTER.
• Erase begins.
When erase completes, the screen in
step 5 appears.
step 5 appears.
• If “C (UNDO)” is displayed, you can
undo edit by pressing Green (C).
• To quit scene erase, press RETURN.
Then the edit screen appears.
11
Press EXIT to exit from Edit
mode.
mode.
NOTE
Selecting start and end points for scene
erase
• You cannot set a range shorter than 3
erase
• You cannot set a range shorter than 3
seconds.
• Once you erase a section of an original, it
is completely erased. It cannot be restored,
so be very careful and confirm before
erasing.
so be very careful and confirm before
erasing.
• Scenes can only be added and erased a
maximum of 50 times per title.
• If scenes have been added 51 or more
times to a disc using another DVD recorder.
Editing (Recording) may not function.
Editing (Recording) may not function.
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
CHANGE THUMBNAIL
DIVIDE CHAPTER
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
8
2
:
0
1
2
1
/
5
2
ERASE THIS SCENE?
ENTER
SELECT
ENTER
RETURN
n
YES
NO
EDIT(HDD ORIGINAL)
9
0
4
1
:
0
2
:
0
2
Editing an Original Title (HDD/DVD)
VIDEO Plus+
Searching for the Start
Point and End Point Scenes
Point and End Point Scenes
The following playback operations are
available when searching for the start point
and end point scenes.
available when searching for the start point
and end point scenes.
Playback
• If you press |
• If you press |
|
|
|
|PLAY, the currently paused
title will be played back.
Skipping to the start of a chapter
• If the scene to be selected is in another title
• If the scene to be selected is in another title
or chapter, first search for the title or
chapter using
chapter using
K
or
L
.
Searching for scenes in a chapter
•
•
G
REV and
J
FWD are convenient for
searching for a scene in a chapter.
Pause
• When you reach a scene near the start
• When you reach a scene near the start
point or end point, press
F
STILL/PAUSE
to pause. This will make it easier to find the
scene. The start and end points may shift
slightly.
scene. The start and end points may shift
slightly.
Frame Advance/Reverse
• If you press
• If you press
L
after pause, the video
will start Frame Advance Playback. If you
press
press
K
, it will start Frame Reverse
Playback.
Final selection of scene
• To select a scene more accurately, use
• To select a scene more accurately, use
slow playback starting a little before the
scene to be selected. This will keep you
from going beyond the scene.
If you press SLOW after pausing, you
can select a scene at your leisure during
slow playback of the video.
scene to be selected. This will keep you
from going beyond the scene.
If you press SLOW after pausing, you
can select a scene at your leisure during
slow playback of the video.
DV-HR350H/300H-070-076
2004.4.8, 1:00 PM
71
Click on the first or last page to see other DV-HR350H (serv.man4) service manuals if exist.