DV-HR300H (serv.man21). Part 2 - Sharp DVD User Guide / Operation Manual. Page 3

This section explains recording on the
hard disc (HDD). (For information on
recording to DVD, see page 38.)

To confirm on TV screen
• Press ON SCREEN (under the cover).
To confirm on front display panel
• Press DISPLAY (under the cover).

• During live programme viewing or HDD

playback, remaining time of recording in
the selected recording mode will be
displayed.

• During HDD recording, remaining time of

recording in the currently selected
recording mode will be displayed.

• High Speed Dubbing Priority
    Normally, recording onto HDD is done

using own format, but recording can also
be done using a format for high speed
dubbing onto DVDs formatted in Video
mode.
To perform high speed dubbing onto a
DVD in Video mode, set “HI SP DUB
PRIORITY” to “YES” and then record. (See
page 48.)

• This lets you playback and watch a

programme from the beginning while it is
being recorded on HDD.

• This lets you playback and watch a

programme recorded on HDD, or a DVD or
CD, while recording another programme on
HDD.

• After recording is finished, you can cut out

commercials and other unnecessary
scenes by calling up the Erase Scene
function.

   (Commercials cannot be cut out automati-

cally during recording.)

• You can set Tamper Proof to prevent

operations by mistake during recording or
timer recording.
1 Press and hold TAMPER PROOF (ON

SCREEN and DISPLAY together) for
more than 2 seconds.

2 Each time you perform this operation,

the function is activated or deactivated.

• If you try to operate the Recorder while

Tamper Proof is set, “

” blinks in the front

display panel and tells you that Tamper
Proof is set.

• When there is a report message (e.g. when

a timer recording was not successfully
performed), the Recorder displays an on-
screen message telling that there is a
report message.
Check the report message by selecting
“INFORMATION” on the START MENU.

HD
OR

I N AL

D

I G

REMAIN 20h0m

0 0 : 0 0 : 0 0

1 0
1 0

• Remaining time for recording differs

according to the recording mode.

• Recordable time might be less than above

figures depending on the programme to be
recorded.

• MN (manual) recording mode setting

allows you to select the picture quality from
among 32 levels on the “MANUAL REC.
MODE” screen (page 40).

• Picture in picture
    This lets you monitor a programme being

recorded, while playing back a disc, using
the Simultaneous Recording/Playback
function.

• Titles recorded on HDD can be saved by

dubbing them to DVD-RW/R. (You can also
dub from DVD-RW/R to HDD.)

• You can batch dub up to 5 programmes.

20 hr

67 hr

100 hr

33 hr

This display means
that you can record
20 hours more in
FINE mode.

DV-HR300H-034-039

04.1.16, 2:55 PM

36