Read Sharp DV-700 (serv.man9) Service Manual online
DV-700S
DV-760S/H
DV-760S/H
6. DISASSEMBLY AND REPLACEMENT OF MAIN PARTS
6-1. DISASSEMBLY
1. Remove five screws (A), and remove the cabinet.
Note: When assembling it, tighten the screws in
order of 1 - 2 .
(Because the set may rise a little by tightening
the screws.)
6-1
17. Remove five screws (T) which install the volume
PWB of the front panel.
18. Remove six screws (U) which install the display
PWB.
19. Remove six screws (V) which install the operate
PWB.
* The spacer and insulation seat under the indication
tube of (W) are bonded with both-side sticking tape.
7. Disconnect the lead lines (F) and (G) and (H) from
the main PWB under the mechanism.
8. Remove three screws (J) on both sides of the termi-
nal angle frame.
9. Remove three screws (K) which install the terminal/
power PWB.
10. Remove three screws (L) which install the terminal
block.
11. Remove three screws (M) of the display PWB.
12. Remove four screws (N) of the mecha angle.
13. Remove one screw (P) of the mecha angle.
14. Remove two screws (Q) of the decorative leg.
15. Push out the middle pin (R) of the setting leg in the
direction opposite to insertion. (Two places)
16. Remove two screws (S) which install the main
PWB under the mechanical unit.
2. Remove two screws (B).
3. Remove three screw (C).
4. Release the hooks of the front panel at two places on
both sides and at three places on the bottom, and
slide the front panel toward you.
5. Disconnect the connector (D).
6. Remove four screws (E) which installs the mechani-
cal unit.
Top Cabinet
(A) x2
1
(A)
2
(A) x2
1
(D)
(E) x4
(B) x2
(C) x1
Front Panel
(C) x1
(C) x1
Remove it when you remove
a front panel because screw
catch is done with terminal
in the substrate (headphone)
and the angle from the panel.
a front panel because screw
catch is done with terminal
in the substrate (headphone)
and the angle from the panel.
(L) x3
(K)
(J) x3
(N) x4
(P)
(R) x2
(K)
Terminal PWB
(Q) x2
(M) x3
(S)
(S)
(F)
(G)
(H)
Mechanism
Main PWB
Volume PWB
(W)
Operate PWB
Display PWB
(V) x6
(T) x5
(U) x6
Click on the first or last page to see other DV-700 (serv.man9) service manuals if exist.