Read Sharp DV-560H (serv.man8) User Guide / Operation Manual online
GB
46
•
This function allows you to enjoy a “surround sound” effect when
you are using an analogue connection (using AUDIO OUT
“FRONT” on the DVD player) to 2-channel audio equipment (TV,
etc.).
you are using an analogue connection (using AUDIO OUT
“FRONT” on the DVD player) to 2-channel audio equipment (TV,
etc.).
•
Virtual Surround operates when you are playing DVD discs
recorded in Dolby Digital (AC-3) sound or Dolby Pro Logic sound.
recorded in Dolby Digital (AC-3) sound or Dolby Pro Logic sound.
Preparation:
•
When you use the Virtual Surround function, set the SPEAKER
setting in SET UP to “2ch/DIGITAL”.
setting in SET UP to “2ch/DIGITAL”.
•
When you play a disc recorded using Pro Logic, set the
PRO LOGIC setting in SET UP to “ON”.
PRO LOGIC setting in SET UP to “ON”.
•
These functions do not operate for VCDs or CDs.
•
Virtual Surround cannot be used with linear PCM sound.
1
While a disc is playing, press the VIRTUAL button on the remote
control. Then take the appropriate steps below for your speaker
setup (2ch/DIGITAL or 5.1ch) in “SET UP” (see page 16) and the
audio modes recorded on the disc.
control. Then take the appropriate steps below for your speaker
setup (2ch/DIGITAL or 5.1ch) in “SET UP” (see page 16) and the
audio modes recorded on the disc.
•
Virtual surround does not operate when you set the SPEAKER
Setting in SET UP to “5.1ch”.
Setting in SET UP to “5.1ch”.
•
Virtual Surround does not operate when you are using a Digital
connection.
connection.
•
If the speaker mode is set to “2ch/DIGITAL” in SET UP, the setting
switches between “2ch (down mix)” and “Virtual ON” depending
on the audio modes recorded on the disc (“Dolby Digital” and
“Pro Logic”).
switches between “2ch (down mix)” and “Virtual ON” depending
on the audio modes recorded on the disc (“Dolby Digital” and
“Pro Logic”).
•
When VIRTUAL is on, “VIRTUAL” lights on the front panel display.
•
When PRO LOGIC is on, “PRO LOGIC” lights on the front panel
display.
display.
VIRTUAL Surround (Audio) Selection (DVD only)
SET UP speaker
settings
settings
The speaker mode is set to
2ch/DIGITAL in SET UP.
PRO LOGIC is on.
2ch/DIGITAL in SET UP.
PRO LOGIC is on.
Dolby Digital
(AC-3)
Types of audio recorded
on the disc
✕
✕
Dolby Digital
2ch/Linear
PCM
Dolby
Pro Logic
1
2
3
STANDBY
DISPLAY
4
5
6
9
7
8
0
C
M
VIRTUAL
REPEAT
PROGRAM
DIRECT
CLEAR
RETURN
STILL/
PAUSE
PAUSE
OPEN/
CLOSE
CLOSE
PLAY
SLOW
SKIP
SETUP SUBTITLE ANGLE
AUDIO
REV FWD
STOP
TITLE
MENU
ENTER
DIGITAL
GAMMA
DIGITAL
S. PICTURE
RESUME
A - B
DVD REMOTE CONTROL
DIMMER
THEATER
MODE
PICTURE
NEUTRAL
1
MPEG
Audio
Ver. 2.0
Click on the first or last page to see other DV-560H (serv.man8) service manuals if exist.