Read Sharp DV-560H (serv.man8) User Guide / Operation Manual online
GB
10
S-VIDEO OUT
VIDEO OUT
OPTICAL
DIGITAL OUT
AC IN
FRONT
SURROUND CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
Cb
Cr
Major Components of Your DVD Player
1
Lights when a DVD is loaded
2
Lights when an audio CD is loaded
3
Lights when a Video CD is loaded
4
Shows the title number [DVD only]/Shows the track
number [Video CD and Audio CD]
5
Lights during video CD with playback control only
(See page 27)
6
Shows the chapter number [DVD only]
7
Shows the total time elapsed since the disc started
playing.
8
Lights when it is possible to switch the angle. [DVD
only] (See page 40)
9
STANDBY indicator
•
If no further buttons are pressed within 5 minutes
of the last button being pressed, the startup (stop)
screen disappears.
•
Thirty minutes after the last button was pressed, all
buttons other than PLAY and OPEN/CLOSE are
disabled. Pressing either PLAY or OPEN/CLOSE
re-enables all the other buttons.
0
Operating mode indicator (Messages)
<Display examples>
q
Lights during repeat play
: Repeat
A
B: A-B repeat
w
PROGRAM indicator
Lights during PROGRAM play.
e
PRO LOGIC indicator
r
Virtual Surround indicator
t
Dolby Digital (AC-3) indicator
Front Panel Display
The figure above shows the front panel with all the displays on.
Colour Output Connectors (Y, Cb and Cr): Some TVs and monitors are equipped with input connectors for the component
colour signals (Y, Cb and Cr). By connecting these input connectors to the corresponding output connectors on the DVD
player, you can enjoy higher quality playback images. If you are using a TV or monitor equipped with Y, Cb and Cr
connectors, use these connectors rather than the VIDEO OUT or S-VIDEO OUT connector.
If you are using the Y, Cb and Cr connectors, set the S-VIDEO OUT, VIDEO OUT/Y, Cb, Cr selector switch to “Y, Cb, Cr”.
colour signals (Y, Cb and Cr). By connecting these input connectors to the corresponding output connectors on the DVD
player, you can enjoy higher quality playback images. If you are using a TV or monitor equipped with Y, Cb and Cr
connectors, use these connectors rather than the VIDEO OUT or S-VIDEO OUT connector.
If you are using the Y, Cb and Cr connectors, set the S-VIDEO OUT, VIDEO OUT/Y, Cb, Cr selector switch to “Y, Cb, Cr”.
S-VIDEO OUT, VIDEO OUT/Y, Cb, Cr selector switch
(S-VIDEO OUT, VIDEO OUT: Used when a monitor or TV is connected to the S-
VIDEO OUT, VIDEO OUT or LINE1 out connector.
Y, Cb, Cr: Used when the connected monitor or TV is equipped with Y, Cb and Cr
input connectors.)
(S-VIDEO OUT, VIDEO OUT: Used when a monitor or TV is connected to the S-
VIDEO OUT, VIDEO OUT or LINE1 out connector.
Y, Cb, Cr: Used when the connected monitor or TV is equipped with Y, Cb and Cr
input connectors.)
S-VIDEO OUT
VIDEO OUT
DVD
VCD
CD
STANDBY A
B
PROGRAM
PRO LOGIC
PRO LOGIC
TITLE
PBC
TRACK
CHAPTER
TOTAL TIME
ANGLE
D I G I T A L
V I R T U A L
DOLBY
1
4
6
7
8
9
w q
r
t
e
0
5
3
2
Main Unit (Rear)
Using the Component Colour (Y, Cb and Cr) Output Connectors
LINE1 OUT (21-pin Euro-SCART)
Click on the first or last page to see other DV-560H (serv.man8) service manuals if exist.