Read Sharp CD-SW300H User Guide / Operation Manual online
13/2/06
CD-SW300HE_EN.fm
11
CD-SW300H
TINSZA165AWZZ
1
2
3
4
5
6
7
Preparation for Use
Aerial connection
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
Speaker connection
FRONT SPEAKERS:
Connect the black wire to the FRONT SPEAKERS minus (-) terminal,
and the red wire to the FRONT SPEAKERS plus (+) terminal.
and the red wire to the FRONT SPEAKERS plus (+) terminal.
SUBWOOFER:
Connect the black wire to the SUBWOOFER minus (-) terminal, and
the red wire with purple insulation tube to the SUBWOOFER plus (+)
terminal.
the red wire with purple insulation tube to the SUBWOOFER plus (+)
terminal.
Speaker Light-Up connection
1. Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
sockets for speaker illumination. To turn off the speaker light-up
feature, press the CLEAR/DIMMER button on the remote control
for 2 seconds or more.
sockets for speaker illumination. To turn off the speaker light-up
feature, press the CLEAR/DIMMER button on the remote control
for 2 seconds or more.
Note:
Placing the right speaker light-up wire to the RIGHT socket and the
left speaker light-up wire to the LEFT socket.
2. Connect the subwoofer light-up wire to the SUBWOOFER
LIGHT-UP socket.
left speaker light-up wire to the LEFT socket.
2. Connect the subwoofer light-up wire to the SUBWOOFER
LIGHT-UP socket.
Caution
:
Supplied FM aerial:
Connect the FM aerial wire to the FM
75 OHMS socket and position the FM
aerial wire in the direction where the
strongest signal can be received.
75 OHMS socket and position the FM
aerial wire in the direction where the
strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM
and EARTH (GND) terminals. Position
the AM loop aerial for optimum
reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
and EARTH (GND) terminals. Position
the AM loop aerial for optimum
reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
< Assembling >
< Attaching to the wall >
Wall Screws (not supplied)
ANTENNA
FM
75 OHMS
AM
GND
AM loop
aerial
FM
aerial
AC INPUT
Red
Black
Black
Purple
Never mistake the FRONT SPEAKERS and the SUBWOOFER
terminals. The unit or the speakers may be damaged.
If you use other speakers with an impedance lower than that
specified, the unit may be damaged. Front speakers: 6 ohms,
Subwoofer: 12 ohms.
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not stand or sit on the speakers. You may
be injured.
Do not allow any objects to fall into or to be
placed in the bass reflex duct.
terminals. The unit or the speakers may be damaged.
If you use other speakers with an impedance lower than that
specified, the unit may be damaged. Front speakers: 6 ohms,
Subwoofer: 12 ohms.
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not stand or sit on the speakers. You may
be injured.
Do not allow any objects to fall into or to be
placed in the bass reflex duct.
Incorrect
SPEAKERS
LIGHT-UP
RIGHT
LEFT
LEFT SPEAKER
RIGHT SPEAKER
AC INPUT
AC INPUT
SUBWOOFER
Click on the first or last page to see other CD-SW300H service manuals if exist.